FAG 16006-A-2Z bearings
Deep groove ball bearing 160..-A-2Z, single row, shields, steel sheet metal cage
- Measurement system
- Metric
- Bore diameter
- 30.000 mm
- Outside diameter
- 55.000 mm
- Width
- 9.000 mm
- Cr
- 11220 N
- C0r
- 7390 N
- Limiting speed
- 15700 r/min
- Net weight
- 85.0 g
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Shield on both sides
- Cage
- Steel sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Internal clearance
- CN
- Lubricant in bearing
- Grease
In stock
Technical specification for FAG 16006-A-2Z
Part Number | 16006-A-2Z | |
---|---|---|
Cage | JN | steel sheet metal |
Sealing | 2Z | Non-contact shield on both sides |
Tolerance class | PN | Normal (PN) |
Radial internal clearance | CN (Group N) | Normal internal clearance |
Lubricant | GA14 | Ball bearing grease, low noise, standard for D=62mm |
Main Dimensions & Performance Data | ||
d | 30 mm | Bore diameter |
D | 55 mm | Outside diameter |
B | 9 mm | Width |
Cr | 11220 N | Basic dynamic load rating, radial |
C0r | 7390 N | Basic static load rating, radial |
Cur | 470 N | Fatigue load limit, radial |
nG | 15700 1/min | Limiting speed |
nδ | 10000 1/min | Reference speed |
m | 85.0 g | Weight |
Mounting dimensions | ||
da min | 32 mm | Minimum diameter shaft shoulder |
Da max | 53 mm | Maximum diameter of housing shoulder |
ra max | 0.3 mm | Maximum fillet radius |
Dimensions | ||
rmin | 0.3 mm | Minimum chamfer dimension |
D1 | 47.85 mm | Shoulder diameter outer ring |
D2 | 50.4 mm | Caliber diameter outer ring |
d1 | 39.15 mm | Shoulder diameter inner ring |
FAG 16006-A-2Z, Deep groove ball bearing 160..-A-2Z, single row, shields, steel sheet metal cage, Bore diameter 30 mm, Outside diameter 55 mm, Width 9 mm.
- Sealing: 2Z, Non-contact shield on both sides
- Cage: JN, steel sheet metal
- Lubricant: GA14, Ball bearing grease, low noise, standard for D<=62mm
- Tolerance: PN, Normal (PN)
- Radial internal clearance: CN (Group N), Normal internal clearance
- Log in to post comments