FAG 6011-H-2Z bearings

Deep groove ball bearing 60..-H-2Z, single row, H-Series, shields, steel sheet metal cage

FAG deep groove ball bearing, H-Series, shields

Measurement system: Metric
Bore diameter: 55.000 mm
Outside diameter: 90.000 mm
Width: 18.000 mm
Cr: 26850 N
C0r: 19570 N
Limiting speed: 9200 r/min
Net weight: 0.409 kg
Number of rows: 1
Contact angle deg: 0
Sealing: Shield on both sides
Cage: Steel sheet metal
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: Normal (PN)
Internal clearance: CN
Lubricant in bearing: Grease

In stock

Technical specification for FAG 6011-H-2Z

6011-H-2Z FAG
Main Dimensions & Performance Data
Part Number	6011-H-2Z
Cage	JN	steel sheet metal
Sealing	2Z	Non-contact shield on both sides
Tolerance class	PN	Normal (PN)
Radial internal clearance	CN (Group N)	Normal internal clearance
Lubricant	Lubricating grease	-
d	55 mm	Bore diameter
D	90 mm	Outside diameter
B	18 mm	Width
Cr	26850 N	Basic dynamic load rating, radial
C0r	19570 N	Basic static load rating, radial
Cur	1170 N	Fatigue load limit, radial
n_G	9200 1/min	Limiting speed
n_δ	8500 1/min	Reference speed
m	0.409 kg	Weight
Mounting dimensions
d_{a min}	61 mm	Minimum diameter shaft shoulder
D_{a max}	84 mm	Maximum diameter of housing shoulder
r_{a max}	1 mm	Maximum fillet radius
Dimensions
r_min	1.1 mm	Minimum chamfer dimension
D1	78.6 mm	Shoulder diameter outer ring
D2	80.8 mm	Caliber diameter outer ring
d1	64.3 mm	Shoulder diameter inner ring
d2	61.9 mm	Caliber diameter inner ring

FAG 6011-H-2Z, Deep groove ball bearing 60..-H-2Z, single row, H-Series, shields, steel sheet metal cage, Bore diameter 55 mm, Outside diameter 90 mm, Width 18 mm.

Sealing: 2Z, Non-contact shield on both sides
Cage: JN, steel sheet metal
Tolerance: PN, Normal (PN)
Radial internal clearance: CN (Group N), Normal internal clearance

Comments