FAG QJ1026-N2-MPA bearings
QJ1026-N2-MPA Four point contact bearing, holding grooves, solid brass cage


Four point contact bearing, holding grooves, solid brass cage
Measurement system
Metric
Bore diameter
130.000 mm
Outside diameter
200.000 mm
Width
33.000 mm
Cr
176000 N
C0r
243000 N
Limiting speed
5800 r/min
Net weight
4.44 kg
Number of rows
1
Contact angle deg
35
Sealing
Without
Locating feature
Two locating slots in outer ring
Cage
Machined brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
Normal (PN)
Internal clearance
CN

In stock


Technical specification for FAG QJ1026-N2-MPA

FAG QJ1026-N2-MPA bearing
Part NumberQJ1026-N2-MPA
CageMPAsolid brass cage, outer ring guided
Design, bearing outer ring N2 two retaining grooves in the outer ring on one side
Tolerance class PN Normal (PN)
Axial internal clearance CN Group N (CN)
Main Dimensions & Performance Data
d 130 mm Bore diameter
D 200 mm Outside diameter
B 33 mm Width
Cr 176000 N Basic dynamic load rating, radial
C0r 243000 N Basic static load rating, radial
Cur 9800 N Fatigue load limit, radial
nG 5800 1/min Limiting speed
nϑr 3000 1/min Reference speed
m 4.44 kgWeight
Mounting dimensions
da min 139 mm Minimum diameter shaft shoulder
Da max 191 mm Maximum diameter of housing shoulder
ra max 2 mm Maximum fillet radius
Dimensions
rmin2 mmMinimum chamfer dimension
D1 176.1 mm Shoulder diameter outer ring
d1 155.06 mm Shoulder diameter inner ring
a 116 mm Distance between the apexes of the pressure cones
an 8.1 mm Hight retaining slot
bn 6.5 mm Width retaining slot
rn 1 mm Radius retaining slot
  45° Angle retaining slot
α 35° Contact angle
Four point contact bearing, holding grooves, solid brass cage

FAG QJ1026-N2-MPA, Four point contact bearing QJ10..-N2-MPA, holding grooves, solid brass cage, Main dimensions: 130 x 200 x 33mm.

  • Cage: MPA, solid brass cage, outer ring guided
  • Design, bearing outer ring: N2, two retaining grooves in the outer ring on one side
  • Tolerance: PN, Normal (PN)
  • Axial internal clearance: CN, Group N (CN)

 

Comments

Related products