FAG QJ1076-N2-MPA-C3 bearings

QJ1076-N2-MPA-C3 Four point contact bearing, holding grooves, solid brass cage

In stock

Technical specification for FAG QJ1076-N2-MPA-C3

FAG QJ1076-N2-MPA-C3 bearing
Main Dimensions & Performance Data
Part Number	QJ1076-N2-MPA-C3
Cage	MPA	solid brass cage, outer ring guided
Design, bearing outer ring	N2	two retaining grooves in the outer ring on one side
Tolerance class	PN	Normal (PN)
Axial internal clearance	C3	Group 3 (C3), bigger than CN
d	380 mm	Bore diameter
D	560 mm	Outside diameter
B	82 mm	Width
Cr	790000 N	Basic dynamic load rating, radial
C0r	1790000 N	Basic static load rating, radial
Cur	43000 N	Fatigue load limit, radial
n_G	1900 1/min	Limiting speed
n_ϑr	850 1/min	Reference speed
m	72.0 kg	Weight
Mounting dimensions
d_{a min}	398 mm	Minimum diameter shaft shoulder
D_{a max}	542 mm	Maximum diameter of housing shoulder
r_{a max}	4 mm	Maximum fillet radius
Dimensions
r_min	5 mm	Minimum chamfer dimension
D1	497 mm	Shoulder diameter outer ring
d1	443 mm	Shoulder diameter inner ring
a	329 mm	Distance between the apexes of the pressure cones
a_n	15 mm	Hight retaining slot
b_n	12.5 mm	Width retaining slot
r_n	2.5 mm	Radius retaining slot
	45°	Angle retaining slot
α	35°	Contact angle

FAG QJ1076-N2-MPA-C3, Four point contact bearing QJ10..-N2-MPA, holding grooves, solid brass cage, Main dimensions: 380 x 560 x 82mm.

Cage: MPA, solid brass cage, outer ring guided
Design, bearing outer ring: N2, two retaining grooves in the outer ring on one side
Tolerance: PN, Normal (PN)
Axial internal clearance: C3, Group 3 (C3), bigger than CN

Comments