FAG QJ1260-N2-MPA-C3 bearings
QJ1260-N2-MPA-C3 Four point contact bearing, holding grooves, solid brass cage


Four point contact bearing, holding grooves, solid brass cage
Measurement system
Metric
Bore diameter
300.000 mm
Outside diameter
540.000 mm
Width
98.000 mm
Cr
920000 N
C0r
1930000 N
Limiting speed
2050 r/min
Net weight
134.0 kg
Number of rows
1
Contact angle deg
35
Sealing
Without
Locating feature
Two locating slots in outer ring
Cage
Machined brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
Normal (PN)
Internal clearance
C3

In stock


Technical specification for FAG QJ1260-N2-MPA-C3

FAG QJ1260-N2-MPA-C3 bearing
Part NumberQJ1260-N2-MPA-C3
CageMPAsolid brass cage, outer ring guided
Design, bearing outer ring N2 two retaining grooves in the outer ring on one side
Tolerance class PN Normal (PN)
Axial internal clearance C3 Group 3 (C3), bigger than CN
Main Dimensions & Performance Data
d 300 mm Bore diameter
D 540 mm Outside diameter
B 98 mm Width
Cr 920000 N Basic dynamic load rating, radial
C0r 1930000 N Basic static load rating, radial
Cur 53000 N Fatigue load limit, radial
nG 2050 1/min Limiting speed
nϑr 990 1/min Reference speed
m 134.0 kgWeight
Mounting dimensions
da min 320 mm Minimum diameter shaft shoulder
Da max 520 mm Maximum diameter of housing shoulder
ra max 4 mm Maximum fillet radius
Dimensions
rmin5 mmMinimum chamfer dimension
D1 455.2 mm Shoulder diameter outer ring
d1 388.55 mm Shoulder diameter inner ring
a 840 mm Distance between the apexes of the pressure cones
an 15 mm Hight retaining slot
bn 12.5 mm Width retaining slot
rn 2.5 mm Radius retaining slot
  45° Angle retaining slot
α 35° Contact angle
Four point contact bearing, holding grooves, solid brass cage

FAG QJ1260-N2-MPA-C3, Four point contact bearing QJ12..-N2-MPA, holding grooves, solid brass cage, Main dimensions: 300 x 540 x 98mm.

  • Cage: MPA, solid brass cage, outer ring guided
  • Design, bearing outer ring: N2, two retaining grooves in the outer ring on one side
  • Tolerance: PN, Normal (PN)
  • Axial internal clearance: C3, Group 3 (C3), bigger than CN

 

Comments

Related products

FAG  QJ1260-N2-MPA  bearings
FAG QJ1260-N2-MPA bearings

Brand: FAG
Four-point contact bearings
Dimensions: 300x 540x 98mm