FAG QJ203-MPA bearings
QJ203-MPA four point contact bearing QJ2..-MPA, solid brass cage
- Measurement system
- Metric
- Bore diameter
- 17.000 mm
- Outside diameter
- 40.000 mm
- Width
- 12.000 mm
- Cr
- 15900 N
- C0r
- 10500 N
- Limiting speed
- 34500 r/min
- Net weight
- 83.0 g
- Number of rows
- 1
- Contact angle deg
- 35
- Sealing
- Without
- Cage
- Machined brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Internal clearance
- CN
In stock
Technical specification for FAG QJ203-MPA
| Part Number | QJ203-MPA | |
|---|---|---|
| Cage | MPA | solid brass cage, outer ring guided |
| Tolerance class | PN | Normal (PN) |
| Axial internal clearance | CN | Group N (CN) |
| Main Dimensions & Performance Data | ||
| d | 17 mm | Bore diameter |
| D | 40 mm | Outside diameter |
| B | 12 mm | Width |
| Cr | 15900 N | Basic dynamic load rating, radial |
| C0r | 10500 N | Basic static load rating, radial |
| Cur | 550 N | Fatigue load limit, radial |
| nG | 34500 1/min | Limiting speed |
| nϑr | 15800 1/min | Reference speed |
| m | 83.0 kg | Weight |
| Mounting dimensions | ||
| da min | 21 mm | Minimum diameter shaft shoulder |
| Da max | 36 mm | Maximum diameter of housing shoulder |
| ra max | 0.6 mm | Maximum fillet radius |
| Dimensions | ||
| rmin | 0.6 mm | Minimum chamfer dimension |
| D1 | 31.9 mm | Shoulder diameter outer ring |
| d1 | 24.8 mm | Shoulder diameter inner ring |
| a | 20 mm | Distance between the apexes of the pressure cones |
| α | 35° | Contact angle |
FAG QJ203-MPA, Four point contact bearing QJ2..-MPA, solid brass cage, Main dimensions: 17 x 40 x 12mm.
- Cage: MPA, solid brass cage, outer ring guided
- Tolerance: PN, Normal (PN)
- Axial internal clearance: CN, Group N (CN)
- Log in to post comments