FAG QJ217-XL-N2-MPA-C3 bearings

QJ217-XL-N2-MPA-C3 Four point contact bearing, X-life, holding grooves, solid brass cage

In stock

Technical specification for FAG QJ217-XL-N2-MPA-C3

FAG QJ217-XL-N2-MPA-C3 bearing
Main Dimensions & Performance Data
Part Number	QJ217-XL-N2-MPA-C3
Cage	MPA	solid brass cage, outer ring guided
Design, bearing outer ring	N2	two retaining grooves in the outer ring on one side
Tolerance class	PN	Normal (PN)
Axial internal clearance	C3	Group 3 (C3), bigger than CN
d	85 mm	Bore diameter
D	150 mm	Outside diameter
B	28 mm	Width
Cr	158000 N	Basic dynamic load rating, radial
C0r	160000 N	Basic static load rating, radial
Cur	11100 N	Fatigue load limit, radial
n_G	8800 1/min	Limiting speed
n_ϑr	4050 1/min	Reference speed
m	2.2 kg	Weight
Mounting dimensions
d_{a min}	96 mm	Minimum diameter shaft shoulder
D_{a max}	139 mm	Maximum diameter of housing shoulder
r_{a max}	2 mm	Maximum fillet radius
Dimensions
r_min	2 mm	Minimum chamfer dimension
D1	128.6 mm	Shoulder diameter outer ring
d1	107.6 mm	Shoulder diameter inner ring
a	82 mm	Distance between the apexes of the pressure cones
a_n	8.1 mm	Hight retaining slot
b_n	6.5 mm	Width retaining slot
r_n	1 mm	Radius retaining slot
	45°	Angle retaining slot
α	35°	Contact angle

FAG QJ217-XL-N2-MPA-C3, Four point contact bearing QJ2..-XL-N2-MPA, X-life, holding grooves, solid brass cage, Main dimensions: 85 x 150 x 28mm.

Cage: MPA, solid brass cage, outer ring guided
Design, bearing outer ring: N2, two retaining grooves in the outer ring on one side
Tolerance: PN, Normal (PN)
Axial internal clearance: C3, Group 3 (C3), bigger than CN

Comments