FAG QJ220-N2-MPA-C3 bearings

QJ220-N2-MPA-C3 Four point contact bearing, holding grooves, solid brass cage

In stock

Technical specification for FAG QJ220-N2-MPA-C3

FAG QJ220-N2-MPA-C3 bearing
Main Dimensions & Performance Data
Part Number	QJ220-N2-MPA-C3
Cage	MPA	solid brass cage, outer ring guided
Design, bearing outer ring	N2	two retaining grooves in the outer ring on one side
Tolerance class	PN	Normal (PN)
Axial internal clearance	C3	Group 3 (C3), bigger than CN
d	100 mm	Bore diameter
D	180 mm	Outside diameter
B	34 mm	Width
Cr	224000 N	Basic dynamic load rating, radial
C0r	241000 N	Basic static load rating, radial
Cur	11500 N	Fatigue load limit, radial
n_G	6600 1/min	Limiting speed
n_ϑr	3550 1/min	Reference speed
m	3.89 kg	Weight
Mounting dimensions
d_{a min}	112 mm	Minimum diameter shaft shoulder
D_{a max}	168 mm	Maximum diameter of housing shoulder
r_{a max}	2.1 mm	Maximum fillet radius
Dimensions
r_min	2.1 mm	Minimum chamfer dimension
D1	153.6 mm	Shoulder diameter outer ring
d1	127.7 mm	Shoulder diameter inner ring
a	98 mm	Distance between the apexes of the pressure cones
a_n	10.1 mm	Hight retaining slot
b_n	8.5 mm	Width retaining slot
r_n	2 mm	Radius retaining slot
	45°	Angle retaining slot
α	35°	Contact angle

FAG QJ220-N2-MPA-C3, Four point contact bearing QJ2..-N2-MPA, holding grooves, solid brass cage, Main dimensions: 100 x 180 x 34mm.

Cage: MPA, solid brass cage, outer ring guided
Design, bearing outer ring: N2, two retaining grooves in the outer ring on one side
Tolerance: PN, Normal (PN)
Axial internal clearance: C3, Group 3 (C3), bigger than CN

Comments