FAG QJ240-N2-MPA-C3 bearings
QJ240-N2-MPA-C3 Four point contact bearing, holding grooves, solid brass cage
- Measurement system
- Metric
- Bore diameter
- 200.000 mm
- Outside diameter
- 360.000 mm
- Width
- 58.000 mm
- Cr
- 510000 N
- C0r
- 850000 N
- Limiting speed
- 3200 r/min
- Net weight
- 27.857 kg
- Number of rows
- 1
- Contact angle deg
- 35
- Sealing
- Without
- Locating feature
- Two locating slots in outer ring
- Cage
- Machined brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Internal clearance
- C3
In stock
Technical specification for FAG QJ240-N2-MPA-C3
| Part Number | QJ240-N2-MPA-C3 | |
|---|---|---|
| Cage | MPA | solid brass cage, outer ring guided |
| Design, bearing outer ring | N2 | two retaining grooves in the outer ring on one side |
| Tolerance class | PN | Normal (PN) |
| Axial internal clearance | C3 | Group 3 (C3), bigger than CN |
| Main Dimensions & Performance Data | ||
| d | 200 mm | Bore diameter |
| D | 360 mm | Outside diameter |
| B | 58 mm | Width |
| Cr | 510000 N | Basic dynamic load rating, radial |
| C0r | 850000 N | Basic static load rating, radial |
| Cur | 28500 N | Fatigue load limit, radial |
| nG | 3200 1/min | Limiting speed |
| nϑr | 1610 1/min | Reference speed |
| m | 27.857 kg | Weight |
| Mounting dimensions | ||
| da min | 217 mm | Minimum diameter shaft shoulder |
| Da max | 343 mm | Maximum diameter of housing shoulder |
| ra max | 3 mm | Maximum fillet radius |
| Dimensions | ||
| rmin | 4 mm | Minimum chamfer dimension |
| D1 | 302 mm | Shoulder diameter outer ring |
| d1 | 258.6 mm | Shoulder diameter inner ring |
| a | 196 mm | Distance between the apexes of the pressure cones |
| an | 12.7 mm | Hight retaining slot |
| bn | 10.5 mm | Width retaining slot |
| rn | 2 mm | Radius retaining slot |
| 45° | Angle retaining slot | |
| α | 35° | Contact angle |
FAG QJ240-N2-MPA-C3, Four point contact bearing QJ2..-N2-MPA, holding grooves, solid brass cage, Main dimensions: 200 x 360 x 58mm.
- Cage: MPA, solid brass cage, outer ring guided
- Design, bearing outer ring: N2, two retaining grooves in the outer ring on one side
- Tolerance: PN, Normal (PN)
- Axial internal clearance: C3, Group 3 (C3), bigger than CN
- Log in to post comments
Related products
FAG QJ240-N2-MPA bearings
Brand: FAG
Four-point contact bearings
Dimensions: 200x 360x 58mm