FAG QJ322-N2-MPA-C3 bearings
QJ322-N2-MPA-C3 Four point contact bearing, holding grooves, solid brass cage
- Measurement system
- Metric
- Bore diameter
- 110.000 mm
- Outside diameter
- 240.000 mm
- Width
- 50.000 mm
- Cr
- 345000 N
- C0r
- 415000 N
- Limiting speed
- 4950 r/min
- Net weight
- 11.79 kg
- Number of rows
- 1
- Contact angle deg
- 35
- Sealing
- Without
- Locating feature
- Two locating slots in outer ring
- Cage
- Machined brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Internal clearance
- C3
In stock
Technical specification for FAG QJ322-N2-MPA-C3
| Part Number | QJ322-N2-MPA-C3 | |
|---|---|---|
| Cage | MPA | solid brass cage, outer ring guided |
| Design, bearing outer ring | N2 | two retaining grooves in the outer ring on one side |
| Tolerance class | PN | Normal (PN) |
| Axial internal clearance | C3 | Group 3 (C3), bigger than CN |
| Main Dimensions & Performance Data | ||
| d | 110 mm | Bore diameter |
| D | 240 mm | Outside diameter |
| B | 50 mm | Width |
| Cr | 345000 N | Basic dynamic load rating, radial |
| C0r | 415000 N | Basic static load rating, radial |
| Cur | 18000 N | Fatigue load limit, radial |
| nG | 4950 1/min | Limiting speed |
| nϑr | 2700 1/min | Reference speed |
| m | 11.79 kg | Weight |
| Mounting dimensions | ||
| da min | 124 mm | Minimum diameter shaft shoulder |
| Da max | 226 mm | Maximum diameter of housing shoulder |
| ra max | 2.5 mm | Maximum fillet radius |
| Dimensions | ||
| rmin | 3 mm | Minimum chamfer dimension |
| D1 | 195.5 mm | Shoulder diameter outer ring |
| d1 | 156.5 mm | Shoulder diameter inner ring |
| a | 123 mm | Distance between the apexes of the pressure cones |
| an | 11.7 mm | Hight retaining slot |
| bn | 10.5 mm | Width retaining slot |
| rn | 2 mm | Radius retaining slot |
| 45° | Angle retaining slot | |
| α | 35° | Contact angle |
FAG QJ322-N2-MPA-C3, Four point contact bearing QJ3..-N2-MPA, holding grooves, solid brass cage, Main dimensions: 110 x 240 x 50mm.
- Cage: MPA, solid brass cage, outer ring guided
- Design, bearing outer ring: N2, two retaining grooves in the outer ring on one side
- Tolerance: PN, Normal (PN)
- Axial internal clearance: C3, Group 3 (C3), bigger than CN
- Log in to post comments
Related products
FAG QJ322-N2-MPA bearings
Brand: FAG
Four-point contact bearings
Dimensions: 110x 240x 50mm