FAG QJ338-N2-MPA-C3 bearings
QJ338-N2-MPA-C3 Four point contact bearing, holding grooves, solid brass cage


Four point contact bearing, holding grooves, solid brass cage
Measurement system
Metric
Bore diameter
190.000 mm
Outside diameter
400.000 mm
Width
78.000 mm
Cr
740000 N
C0r
1250000 N
Limiting speed
2850 r/min
Net weight
51.4 kg
Number of rows
1
Contact angle deg
35
Sealing
Without
Locating feature
Two locating slots in outer ring
Cage
Machined brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
Normal (PN)
Internal clearance
C3

In stock


Technical specification for FAG QJ338-N2-MPA-C3

FAG QJ338-N2-MPA-C3 bearing
Part NumberQJ338-N2-MPA-C3
CageMPAsolid brass cage, outer ring guided
Design, bearing outer ring N2 two retaining grooves in the outer ring on one side
Tolerance class PN Normal (PN)
Axial internal clearance C3 Group 3 (C3), bigger than CN
Main Dimensions & Performance Data
d 190 mm Bore diameter
D 400 mm Outside diameter
B 78 mm Width
Cr 740000 N Basic dynamic load rating, radial
C0r 1250000 N Basic static load rating, radial
Cur 40500 N Fatigue load limit, radial
nG 2850 1/min Limiting speed
nϑr 1320 1/min Reference speed
m 51.4 kgWeight
Mounting dimensions
da min 210 mm Minimum diameter shaft shoulder
Da max 380 mm Maximum diameter of housing shoulder
ra max 4 mm Maximum fillet radius
Dimensions
rmin5 mmMinimum chamfer dimension
D1 327 mm Shoulder diameter outer ring
d1 262.5 mm Shoulder diameter inner ring
a 207 mm Distance between the apexes of the pressure cones
an 12.7 mm Hight retaining slot
bn 10.5 mm Width retaining slot
rn 2 mm Radius retaining slot
  45° Angle retaining slot
α 35° Contact angle
Four point contact bearing, holding grooves, solid brass cage

FAG QJ338-N2-MPA-C3, Four point contact bearing QJ3..-N2-MPA, holding grooves, solid brass cage, Main dimensions: 190 x 400 x 78mm.

  • Cage: MPA, solid brass cage, outer ring guided
  • Design, bearing outer ring: N2, two retaining grooves in the outer ring on one side
  • Tolerance: PN, Normal (PN)
  • Axial internal clearance: C3, Group 3 (C3), bigger than CN

 

Comments

Related products

FAG  QJ338-N2-MPA  bearings
FAG QJ338-N2-MPA bearings

Brand: FAG
Four-point contact bearings
Dimensions: 190x 400x 78mm