INA CSCA042-HLE bearings

Deep groove ball bearing, Thin section bearing CSCA, brass sheet metal cage

Measurement system: Inch
Bore diameter: 107.950 mm
Outside diameter: 120.650 mm
Width: 6.350 mm
Cr: 4300 N
C0r: 5500 N
Limiting speed: 5100 r/min
Net weight: 90.0 g
Number of rows: 1
Contact angle deg: 0
Sealing: Without
Cage: Brass sheet metal
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: PL1
Lubricant in bearing: Without

In stock

Technical specification for INA CSCA042-HLE

INA CSCA042-HLE
Main Dimensions & Performance Data
Part Number	CSCA042-HLE
Logistical code	HLE
Sealing	Without	not sealed
Cage	YH	brass sheet metal
Tolerance class	PL1	Class PL1, Normal
Lubricant	Without	Bearing not greased
d	107.95 mm 4.25 in	Bore diameter
D	120.65 mm 4.75 in	Outside diameter
B	6.35 mm 0.25 in	Width
Cr	4300 N	Basic dynamic load rating, radial
C0r	5500 N	Basic static load rating, radial
n_G	5100 1/min	Limiting speed
m	≈ 90.0 g	Weight
Dimensions
r_min	0.6 mm	Minimum chamfer dimension
d₁	112.6 mm	Shoulder diameter inner ring
D₁	115.9 mm	Shoulder diameter outer ring

INA CSCA042-HLE, Deep groove ball bearing, Thin section bearing CSCA, brass sheet metal cage. INA CSCA042-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.

INA CSCA042-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.

Comments