INA CSCA045-HLE bearings
Deep groove ball bearing, Thin section bearing CSCA, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 114.300 mm
- Outside diameter
- 127.000 mm
- Width
- 6.350 mm
- Cr
- 4400 N
- C0r
- 5800 N
- Limiting speed
- 4800 r/min
- Net weight
- 100.0 g
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSCA045-HLE
| Part Number | CSCA045-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | Without | not sealed |
| Cage | YH | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Without | Bearing not greased |
| Main Dimensions & Performance Data | ||
| d | 114.3 mm 4.5 in | Bore diameter |
| D | 127 mm 5 in | Outside diameter |
| B | 6.35 mm 0.25 in | Width |
| Cr | 4400 N | Basic dynamic load rating, radial |
| C0r | 5800 N | Basic static load rating, radial |
| nG | 4800 1/min | Limiting speed |
| m | ≈ 100.0 g | Weight |
| Dimensions | ||
| rmin | 0.6 mm | Minimum chamfer dimension |
| d1 | 119 mm | Shoulder diameter inner ring |
| D1 | 122.3 mm | Shoulder diameter outer ring |
INA CSCA045-HLE, Deep groove ball bearing, Thin section bearing CSCA, brass sheet metal cage. INA CSCA045-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSCA045-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.
- Log in to post comments
Related products
NSK NBX11406
Brand: NSK
NBX11406, NSK, N Series Inch Design Ball Bearings, Four-point contact type
INA CSXA045-HLE
Brand: INA
Four point contact bearing, Thin section bearing CSXA, brass sheet metal cage
NSK NBA11406
Brand: NSK
NBA11406, NSK, N Series Inch Design Ball Bearings, Angular contact type
KAYDON KA045XP0
Brand: KAYDON
Reali-Slim open thin section ball bearings, KA series, Type X -- four-point contact, 4.5x5x0.25 inches
KAYDON KA045CP0
Brand: KAYDON
Reali-Slim open thin section ball bearings, KA series, radial contact, 4.5x5x0.25 inches
NSK NBC11406
Brand: NSK
N Series inch design deep groove ball bearings
KAYDON KA045AR0
Brand: KAYDON
Reali-Slim open thin section ball bearings, KA series, angular contact, 4.5x5x0.25 inches