INA CSCA050-HLE bearings

Deep groove ball bearing, Thin section bearing CSCA, brass sheet metal cage

Measurement system: Inch
Bore diameter: 127.000 mm
Outside diameter: 139.700 mm
Width: 6.350 mm
Cr: 4550 N
C0r: 6400 N
Limiting speed: 4350 r/min
Net weight: 110.0 g
Number of rows: 1
Contact angle deg: 0
Sealing: Without
Cage: Brass sheet metal
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: PL1
Lubricant in bearing: Without

In stock

Technical specification for INA CSCA050-HLE

INA CSCA050-HLE
Main Dimensions & Performance Data
Part Number	CSCA050-HLE
Logistical code	HLE
Sealing	Without	not sealed
Cage	YH	brass sheet metal
Tolerance class	PL1	Class PL1, Normal
Lubricant	Without	Bearing not greased
d	127 mm 5 in	Bore diameter
D	139.7 mm 5.5 in	Outside diameter
B	6.35 mm 0.25 in	Width
Cr	4550 N	Basic dynamic load rating, radial
C0r	6400 N	Basic static load rating, radial
n_G	4350 1/min	Limiting speed
m	≈ 110.0 g	Weight
Dimensions
r_min	0.6 mm	Minimum chamfer dimension
d₁	131.7 mm	Shoulder diameter inner ring
D₁	135 mm	Shoulder diameter outer ring

INA CSCA050-HLE, Deep groove ball bearing, Thin section bearing CSCA, brass sheet metal cage. INA CSCA050-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.

INA CSCA050-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.

Comments