INA CSCA090-HLE bearings
Deep groove ball bearing, Thin section bearing CSCA, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 228.600 mm
- Outside diameter
- 241.300 mm
- Width
- 6.350 mm
- Cr
- 5600 N
- C0r
- 11500 N
- Limiting speed
- 2390 r/min
- Net weight
- 200.0 g
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSCA090-HLE
| Part Number | CSCA090-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | Without | not sealed |
| Cage | YH | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Without | Bearing not greased |
| Main Dimensions & Performance Data | ||
| d | 228.6 mm 9 in | Bore diameter |
| D | 241.3 mm 9.5 in | Outside diameter |
| B | 6.35 mm 0.25 in | Width |
| Cr | 5600 N | Basic dynamic load rating, radial |
| C0r | 11500 N | Basic static load rating, radial |
| nG | 2390 1/min | Limiting speed |
| m | ≈ 200.0 g | Weight |
| Dimensions | ||
| rmin | 0.6 mm | Minimum chamfer dimension |
| d1 | 233.3 mm | Shoulder diameter inner ring |
| D1 | 236.6 mm | Shoulder diameter outer ring |
INA CSCA090-HLE, Deep groove ball bearing, Thin section bearing CSCA, brass sheet metal cage. INA CSCA090-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSCA090-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.
- Log in to post comments
Related products
KAYDON KA090XP0 bearings
Brand: KAYDON
Thin section bearings
Dimensions: 228.600x 241.300x 6.350mm
KAYDON KA090CP0 bearings
Brand: KAYDON
Thin section bearings
Dimensions: 228.600x 241.300x 6.350mm
KAYDON KA090AR0 bearings
Brand: KAYDON
Thin section bearings
Dimensions: 228.600x 241.300x 6.350mm