INA CSCA100-HLE bearings
Deep groove ball bearing, Thin section bearing CSCA, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 254.000 mm
- Outside diameter
- 266.700 mm
- Width
- 6.350 mm
- Cr
- 5800 N
- C0r
- 12800 N
- Limiting speed
- 2150 r/min
- Net weight
- 230.0 g
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSCA100-HLE
| Part Number | CSCA100-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | Without | not sealed |
| Cage | YH | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Without | Bearing not greased |
| Main Dimensions & Performance Data | ||
| d | 254 mm 10 in | Bore diameter |
| D | 266.7 mm 10.5 in | Outside diameter |
| B | 6.35 mm 0.25 in | Width |
| Cr | 5800 N | Basic dynamic load rating, radial |
| C0r | 12800 N | Basic static load rating, radial |
| nG | 2150 1/min | Limiting speed |
| m | ≈ 230.0 g | Weight |
| Dimensions | ||
| rmin | 0.6 mm | Minimum chamfer dimension |
| d1 | 258.7 mm | Shoulder diameter inner ring |
| D1 | 262 mm | Shoulder diameter outer ring |
INA CSCA100-HLE, Deep groove ball bearing, Thin section bearing CSCA, brass sheet metal cage. INA CSCA100-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSCA100-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.
- Log in to post comments
Related products
KAYDON KA100XP0 bearings
Brand: KAYDON
Thin section bearings
Dimensions: 254x 266.700x 6.350mm
KAYDON KA100CP0 bearings
Brand: KAYDON
Thin section bearings
Dimensions: 254x 266.700x 6.350mm
KAYDON KA100AR0 bearings
Brand: KAYDON
Thin section bearings
Dimensions: 254x 266.700x 6.350mm