INA CSCA120-HLE bearings
Deep groove ball bearing, Thin section bearing CSCA, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 304.800 mm
- Outside diameter
- 317.500 mm
- Width
- 6.350 mm
- Cr
- 6200 N
- C0r
- 15300 N
- Limiting speed
- 1780 r/min
- Net weight
- 240.0 g
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSCA120-HLE
Part Number | CSCA120-HLE | |
---|---|---|
Logistical code | HLE | |
Sealing | Without | not sealed |
Cage | YH | brass sheet metal |
Tolerance class | PL1 | Class PL1, Normal |
Lubricant | Without | Bearing not greased |
Main Dimensions & Performance Data | ||
d | 304.8 mm 12 in | Bore diameter |
D | 317.5 mm 12.5 in | Outside diameter |
B | 6.35 mm 0.25 in | Width |
Cr | 6200 N | Basic dynamic load rating, radial |
C0r | 15300 N | Basic static load rating, radial |
nG | 1780 1/min | Limiting speed |
m | ≈ 240.0 g | Weight |
Dimensions | ||
rmin | 0.6 mm | Minimum chamfer dimension |
d1 | 309.5 mm | Shoulder diameter inner ring |
D1 | 312.8 mm | Shoulder diameter outer ring |
INA CSCA120-HLE, Deep groove ball bearing, Thin section bearing CSCA, brass sheet metal cage. INA CSCA120-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSCA120-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.
- Log in to post comments
Related products
KAYDON KA120CP0 bearings
Brand: KAYDON
Thin section bearings
Dimensions: 304.800x 317.500x 6.350mm
KAYDON KA120AR0 bearings
Brand: KAYDON
Thin section bearings
Dimensions: 304.800x 317.500x 6.350mm