INA CSCAA015-TV-HLE bearings

Deep groove ball bearing, Thin section bearing CSCAA..-TV, plastic cage

Measurement system: Inch
Bore diameter: 38.100 mm
Outside diameter: 47.625 mm
Width: 4.763 mm
Cr: 2020 N
C0r: 1540 N
Limiting speed: 14100 r/min
Net weight: 20.0 g
Number of rows: 1
Contact angle deg: 0
Sealing: Without
Cage: Plastic Cage
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: PL1
Lubricant in bearing: Without

In stock

Technical specification for INA CSCAA015-TV-HLE

INA CSCAA015-TV-HLE
Main Dimensions & Performance Data
Part Number	CSCAA015-TV-HLE
Logistical code	HLE
Sealing	Without	not sealed
Cage	TV	Plastic Cage made from PA66
Tolerance class	PL1	Class PL1, Normal
Lubricant	Without	Bearing not greased
d	38.1 mm 1.5 in	Bore diameter
D	47.625 mm 1.875 in	Outside diameter
B	4.763 mm 0.188 in	Width
Cr	2020 N	Basic dynamic load rating, radial
C0r	1540 N	Basic static load rating, radial
n_G	14100 1/min	Limiting speed
m	≈ 20.0 g	Weight
Dimensions
r_min	0.38 mm	Minimum chamfer dimension
d₁	44.1 mm	Shoulder diameter inner ring
D₁	47.1 mm	Shoulder diameter outer ring

INA CSCAA015-TV-HLE, Deep groove ball bearing, Thin section bearing CSCAA..-TV, plastic cage. INA CSCAA015-TV-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.

INA CSCAA015-TV-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.

Comments