INA CSCC080-HLE bearings
Deep groove ball bearing, Thin section bearing CSCC, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 203.200 mm
- Outside diameter
- 222.250 mm
- Width
- 9.525 mm
- Cr
- 10000 N
- C0r
- 16200 N
- Limiting speed
- 2650 r/min
- Net weight
- 380.0 g
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSCC080-HLE
Part Number | CSCC080-HLE | |
---|---|---|
Logistical code | HLE | |
Sealing | Without | not sealed |
Cage | YH | brass sheet metal |
Tolerance class | PL1 | Class PL1, Normal |
Lubricant | Without | Bearing not greased |
Main Dimensions & Performance Data | ||
d | 203.2 mm 8 in | Bore diameter |
D | 222.25 mm 8.75 in | Outside diameter |
B | 9.525 mm 0.375 in | Width |
Cr | 10000 N | Basic dynamic load rating, radial |
C0r | 16200 N | Basic static load rating, radial |
nG | 2650 1/min | Limiting speed |
m | ≈ 380.0 g | Weight |
Dimensions | ||
rmin | 1 mm | Minimum chamfer dimension |
d1 | 210.2 mm | Shoulder diameter inner ring |
D1 | 215.5 mm | Shoulder diameter outer ring |
INA CSCC080-HLE, Deep groove ball bearing, Thin section bearing CSCC, brass sheet metal cage. INA CSCC080-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSCC080-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.
- Log in to post comments
Related products
KAYDON KC080XP0 bearings
Brand: KAYDON
Thin section bearings
Dimensions: 203.200x 222.250x 9.525mm
KAYDON KC080CP0 bearings
Brand: KAYDON
Thin section bearings
Dimensions: 203.200x 222.250x 9.525mm
KAYDON KC080AR0 bearings
Brand: KAYDON
Angular contact ball bearing (type A)
Dimensions: 203.200x 222.250x 9.525mm