INA CSCC120-HLE bearings
Deep groove ball bearing, Thin section bearing CSCC, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 304.800 mm
- Outside diameter
- 323.850 mm
- Width
- 9.525 mm
- Cr
- 10900 N
- C0r
- 24200 N
- Limiting speed
- 1740 r/min
- Net weight
- 0.57 kg
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSCC120-HLE
Part Number | CSCC120-HLE | |
---|---|---|
Logistical code | HLE | |
Sealing | Without | not sealed |
Cage | YH | brass sheet metal |
Tolerance class | PL1 | Class PL1, Normal |
Lubricant | Without | Bearing not greased |
Main Dimensions & Performance Data | ||
d | 304.8 mm 12 in | Bore diameter |
D | 323.85 mm 12.75 in | Outside diameter |
B | 9.525 mm 0.375 in | Width |
Cr | 10900 N | Basic dynamic load rating, radial |
C0r | 24200 N | Basic static load rating, radial |
nG | 1740 1/min | Limiting speed |
m | ≈ 0.57 kg | Weight |
Dimensions | ||
rmin | 1 mm | Minimum chamfer dimension |
d1 | 311.8 mm | Shoulder diameter inner ring |
D1 | 316.8 mm | Shoulder diameter outer ring |
INA CSCC120-HLE, Deep groove ball bearing, Thin section bearing CSCC, brass sheet metal cage. INA CSCC120-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSCC120-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.
- Log in to post comments
Related products
KAYDON KC120XP0 bearings
Brand: KAYDON
Thin section bearings
Dimensions: 304.800x 323.850x 9.525mm
KAYDON KC120CP0 bearings
Brand: KAYDON
Thin section bearings
Dimensions: 304.800x 323.850x 9.525mm
KAYDON KC120AR0 bearings
Brand: KAYDON
Angular contact ball bearing (type A)
Dimensions: 304.800x 323.850x 9.525mm