INA CSCD110-HLE bearings
Deep groove ball bearing, Thin section bearing CSCD, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 279.400 mm
- Outside diameter
- 304.800 mm
- Width
- 12.700 mm
- Cr
- 17600 N
- C0r
- 32000 N
- Limiting speed
- 1870 r/min
- Net weight
- 0.93 kg
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSCD110-HLE
Part Number | CSCD110-HLE | |
---|---|---|
Logistical code | HLE | |
Sealing | Without | not sealed |
Cage | YH | brass sheet metal |
Tolerance class | PL1 | Class PL1, Normal |
Lubricant | Without | Bearing not greased |
Main Dimensions & Performance Data | ||
d | 279.4 mm 11 in | Bore diameter |
D | 304.8 mm 12 in | Outside diameter |
B | 12.7 mm 0.5 in | Width |
Cr | 17600 N | Basic dynamic load rating, radial |
C0r | 32000 N | Basic static load rating, radial |
nG | 1870 1/min | Limiting speed |
m | ≈ 0.93 kg | Weight |
Dimensions | ||
rmin | 1.5 mm | Minimum chamfer dimension |
d1 | 288.8 mm | Shoulder diameter inner ring |
D1 | 295.4 mm | Shoulder diameter outer ring |
INA CSCD110-HLE, Deep groove ball bearing, Thin section bearing CSCD, brass sheet metal cage. INA CSCD110-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSCD110-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.
- Log in to post comments
Related products
KAYDON KD110CP0 bearings
Brand: KAYDON
Reali-Slim thin section radial contact ball bearing
Dimensions: 279.400x 304.800x 12.700mm
KAYDON KD110AR0 bearings
Brand: KAYDON
Reali-Slim thin section angular contact ball bearing
Dimensions: 279.400x 304.800x 12.700mm