INA CSCU090-2RS-HLE bearings
Deep groove ball bearing, Thin section bearing CSCU..-2RS, seals, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 228.600 mm
- Outside diameter
- 247.650 mm
- Width
- 12.700 mm
- Cr
- 10400 N
- C0r
- 18200 N
- Limiting speed
- 1150 r/min
- Net weight
- 0.54 kg
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Contact seal on both sides
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Grease
In stock
Technical specification for INA CSCU090-2RS-HLE
Part Number | CSCU090-2RS-HLE | |
---|---|---|
Logistical code | HLE | |
Sealing | 2RS | Contact seal on both sides |
Cage | YH | brass sheet metal |
Tolerance class | PL1 | Class PL1, Normal |
Lubricant | Lubricating grease | - |
Main Dimensions & Performance Data | ||
d | 228.6 mm 9 in | Bore diameter |
D | 247.65 mm 9.75 in | Outside diameter |
B | 12.7 mm 0.5 in | Width |
Cr | 10400 N | Basic dynamic load rating, radial |
C0r | 18200 N | Basic static load rating, radial |
nG | 1150 1/min | Limiting speed |
m | ≈ 0.54 kg | Weight |
Dimensions | ||
rmin | 0.38 mm | Minimum chamfer dimension |
d1 | 232.4 mm | Caliber diameter inner ring |
D1 | 242.2 mm | Caliber diameter outer ring |
INA CSCU090-2RS-HLE, Deep groove ball bearing, Thin section bearing CSCU..-2RS, seals, brass sheet metal cage. The seals are made from synthetic rubber (NBR) and have a steel insert. Sealed bearings are greased. INA CSCU090-2RS-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSCU090-2RS-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.
- Log in to post comments
Related products
KAYDON JU090XP0 bearings
Brand: KAYDON
Reali-Slim thin section four-point contact ball bearing with seals
Dimensions: 228.600x 247.650x 12.700mm
KAYDON JU090CP0 bearings
Brand: KAYDON
Reali-Slim thin section radial contact ball bearing with seals
Dimensions: 228.600x 247.650x 12.700mm
INA CSXU090-2RS-HLE bearings
Brand: INA
Four-point contact bearing
Dimensions: 228.600x 247.650x 12.700mm