INA CSEB020-HLE bearings
Angular contact ball bearing, Thin section bearing CSEB, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 50.800 mm
- Outside diameter
- 66.675 mm
- Width
- 7.938 mm
- Cr
- 4750 N
- C0r
- 4200 N
- Limiting speed
- 10000 r/min
- Net weight
- 70.0 g
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSEB020-HLE
Part Number | CSEB020-HLE | |
---|---|---|
Logistical code | HLE | |
Sealing | Without | not sealed |
Cage | YP | brass sheet metal |
Tolerance class | PL1 | Class PL1, Normal |
Lubricant | Without | Bearing not greased |
Main Dimensions & Performance Data | ||
d | 50.8 mm 2 in | Bore diameter |
D | 66.675 mm 2.625 in | Outside diameter |
B | 7.938 mm 0.313 in | Width |
Cr | 4750 N | Basic dynamic load rating, radial |
C0r | 4200 N | Basic static load rating, radial |
nG | 10000 1/min | Limiting speed |
m | ≈ 70.0 g | Weight |
Dimensions | ||
rmin | 1 mm | Minimum chamfer dimension |
d1 | 56.7 mm | Shoulder diameter inner ring |
D1 | 60.8 mm | Shoulder diameter on outer ring wide side face |
D2 | 62.6 mm | Shoulder diameter on outer ring small side face |
α | 30° | Shoulder diameter outer ring |
INA CSEB020-HLE, Angular contact ball bearing, Thin section bearing CSEB, brass sheet metal cage. INA CSEB020-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSEB020-HLE angular contact ball bearings (type E) can be filled with an increasednumber of balls and have a nominal contact angle of α = 30°. They cansupport considerably higher radial loads than deep groove ball bearings orfour point contact bearings and can support axial loads in one direction.
- Log in to post comments
Related products
NSK NBX5007 bearings
Brand: NSK
N Series Inch Design Ball Bearings
Dimensions: 50.800x 66.675x 7.938mm
INA CSXB020 bearings
Brand: INA
Thin section bearing
Dimensions: 50.800x 66.675x 7.938mm
NSK NBA5007 bearings
Brand: NSK
N Series Inch Design Ball Bearings
Dimensions: 50.800x 66.675x 7.938mm
INA CSCB020-HLE bearings
Brand: INA
Deep groove ball bearing
Dimensions: 50.800x 66.675x 7.938mm
KAYDON KB020XP0 bearings
Brand: KAYDON
Thin section ball bearings
Dimensions: 50.800x 66.675x 7.938mm
KAYDON KB020CP0 bearings
Brand: KAYDON
Thin section ball bearings
Dimensions: 50.800x 66.675x 7.938mm
KAYDON KB020AR0 bearings
Brand: KAYDON
Thin section ball bearings
Dimensions: 50.800x 66.675x 7.938mm
NSK NBC5007 bearings
Brand: NSK
Thin section bearings
Dimensions: 50.800x 66.675x 7.938mm