INA CSEB030-HLE bearings
Angular contact ball bearing, Thin section bearing CSEB, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 76.200 mm
- Outside diameter
- 92.075 mm
- Width
- 7.938 mm
- Cr
- 5400 N
- C0r
- 6100 N
- Limiting speed
- 7000 r/min
- Net weight
- 110.0 g
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSEB030-HLE
Part Number | CSEB030-HLE | |
---|---|---|
Logistical code | HLE | |
Sealing | Without | not sealed |
Cage | YP | brass sheet metal |
Tolerance class | PL1 | Class PL1, Normal |
Lubricant | Without | Bearing not greased |
Main Dimensions & Performance Data | ||
d | 76.2 mm 3 in | Bore diameter |
D | 92.075 mm 3.625 in | Outside diameter |
B | 7.938 mm 0.313 in | Width |
Cr | 5400 N | Basic dynamic load rating, radial |
C0r | 6100 N | Basic static load rating, radial |
nG | 7000 1/min | Limiting speed |
m | ≈ 110.0 g | Weight |
Dimensions | ||
rmin | 1 mm | Minimum chamfer dimension |
d1 | 82.1 mm | Shoulder diameter inner ring |
D1 | 86.2 mm | Shoulder diameter on outer ring wide side face |
D2 | 87.9 mm | Shoulder diameter on outer ring small side face |
α | 30° | Shoulder diameter outer ring |
INA CSEB030-HLE, Angular contact ball bearing, Thin section bearing CSEB, brass sheet metal cage. INA CSEB030-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSEB030-HLE angular contact ball bearings (type E) can be filled with an increasednumber of balls and have a nominal contact angle of α = 30°. They cansupport considerably higher radial loads than deep groove ball bearings orfour point contact bearings and can support axial loads in one direction.
- Log in to post comments
Related products
NSK NBA7607 bearings
Brand: NSK
N Series Inch Design Ball Bearings
Dimensions: 76.200x 92.075x 7.938mm
INA CSCB030-HLE bearings
Brand: INA
Deep groove ball bearing
Dimensions: 76.200x 92.075x 7.938mm
KAYDON KB030XP0 bearings
Brand: KAYDON
Thin section ball bearings
Dimensions: 76.200x 92.075x 7.938mm
KAYDON KB030CP0 bearings
Brand: KAYDON
Thin section ball bearings
Dimensions: 76.200x 92.075x 7.938mm
KAYDON KB030AR0 bearings
Brand: KAYDON
Thin section ball bearings
Dimensions: 76.200x 92.075x 7.938mm
NSK NBC7607 bearings
Brand: NSK
Thin section bearings
Dimensions: 76.200x 92.075x 7.938mm