INA CSEB042-HLE bearings
Angular contact ball bearing, Thin section bearing CSEB, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 107.950 mm
- Outside diameter
- 123.825 mm
- Width
- 7.938 mm
- Cr
- 6200 N
- C0r
- 8600 N
- Limiting speed
- 5000 r/min
- Net weight
- 140.0 g
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSEB042-HLE
Part Number | CSEB042-HLE | |
---|---|---|
Logistical code | HLE | |
Sealing | Without | not sealed |
Cage | YP | brass sheet metal |
Tolerance class | PL1 | Class PL1, Normal |
Lubricant | Without | Bearing not greased |
Main Dimensions & Performance Data | ||
d | 107.95 mm 4.25 in | Bore diameter |
D | 123.825 mm 4.875 in | Outside diameter |
B | 7.938 mm 0.313 in | Width |
Cr | 6200 N | Basic dynamic load rating, radial |
C0r | 8600 N | Basic static load rating, radial |
nG | 5000 1/min | Limiting speed |
m | ≈ 140.0 g | Weight |
Dimensions | ||
rmin | 1 mm | Minimum chamfer dimension |
d1 | 113.8 mm | Shoulder diameter inner ring |
D1 | 117.9 mm | Shoulder diameter on outer ring wide side face |
D2 | 119.6 mm | Shoulder diameter on outer ring small side face |
α | 30° | Shoulder diameter outer ring |
INA CSEB042-HLE, Angular contact ball bearing, Thin section bearing CSEB, brass sheet metal cage. INA CSEB042-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSEB042-HLE angular contact ball bearings (type E) can be filled with an increasednumber of balls and have a nominal contact angle of α = 30°. They cansupport considerably higher radial loads than deep groove ball bearings orfour point contact bearings and can support axial loads in one direction.
- Log in to post comments
Related products
NSK NBA10707 bearings
Brand: NSK
N Series Inch Design Ball Bearings
Dimensions: 107.950x 123.825x 7.938mm
INA CSCB042-HLE bearings
Brand: INA
Deep groove ball bearing
Dimensions: 107.950x 123.825x 7.938mm
KAYDON KB042XP0 bearings
Brand: KAYDON
Thin section ball bearings
Dimensions: 107.950x 123.825x 7.938mm
KAYDON KB042CP0 bearings
Brand: KAYDON
Thin section ball bearings
Dimensions: 107.950x 123.825x 7.938mm
KAYDON KB042AR0 bearings
Brand: KAYDON
Thin section ball bearings
Dimensions: 107.950x 123.825x 7.938mm
NSK NBC10707 bearings
Brand: NSK
Thin section bearings
Dimensions: 107.950x 123.825x 7.938mm