INA CSED070-HLE bearings
Angular contact ball bearing, Thin section bearing CSED, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 177.800 mm
- Outside diameter
- 203.200 mm
- Width
- 12.700 mm
- Cr
- 14900 N
- C0r
- 23700 N
- Limiting speed
- 2950 r/min
- Net weight
- 0.6 kg
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Without
In stock
Technical specification for INA CSED070-HLE
Part Number | CSED070-HLE | |
---|---|---|
Logistical code | HLE | |
Sealing | Without | not sealed |
Cage | YP | brass sheet metal |
Tolerance class | PL1 | Class PL1, Normal |
Lubricant | Without | Bearing not greased |
Main Dimensions & Performance Data | ||
d | 177.8 mm 7 in | Bore diameter |
D | 203.2 mm 8 in | Outside diameter |
B | 12.7 mm 0.5 in | Width |
Cr | 14900 N | Basic dynamic load rating, radial |
C0r | 23700 N | Basic static load rating, radial |
nG | 2950 1/min | Limiting speed |
m | ≈ 0.6 kg | Weight |
Dimensions | ||
rmin | 1.5 mm | Minimum chamfer dimension |
d1 | 187.2 mm | Shoulder diameter inner ring |
D1 | 193.8 mm | Shoulder diameter on outer ring wide side face |
D2 | 196.5 mm | Shoulder diameter on outer ring small side face |
α | 30° | Shoulder diameter outer ring |
INA CSED070-HLE, Angular contact ball bearing, Thin section bearing CSED, brass sheet metal cage. INA CSED070-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSED070-HLE angular contact ball bearings (type E) can be filled with an increasednumber of balls and have a nominal contact angle of α = 30°. They cansupport considerably higher radial loads than deep groove ball bearings orfour point contact bearings and can support axial loads in one direction.
- Log in to post comments
Related products
INA CSCD070-HLE bearings
Brand: INA
Deep groove ball bearing
Dimensions: 177.800x 203.200x 12.700mm
KAYDON KD070CP0 bearings
Brand: KAYDON
Reali-Slim thin section radial contact ball bearing
Dimensions: 177.800x 203.200x 12.700mm
KAYDON KD070AR0 bearings
Brand: KAYDON
Reali-Slim thin section angular contact ball bearing
Dimensions: 177.800x 203.200x 12.700mm