INA CSEG075-HLE bearings

Angular contact ball bearing, Thin section bearing CSEG, brass sheet metal cage

Measurement system: Inch
Bore diameter: 190.500 mm
Outside diameter: 241.300 mm
Width: 25.400 mm
Cr: 47000 N
C0r: 63000 N
Limiting speed: 2480 r/min
Net weight: 2.81 kg
Number of rows: 1
Contact angle deg: 30
Sealing: Without
Cage: Brass sheet metal
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: PL1
Lubricant in bearing: Without

In stock

Technical specification for INA CSEG075-HLE

INA CSEG075-HLE
Main Dimensions & Performance Data
Part Number	CSEG075-HLE
Logistical code	HLE
Sealing	Without	not sealed
Cage	YP	brass sheet metal
Tolerance class	PL1	Class PL1, Normal
Lubricant	Without	Bearing not greased
d	190.5 mm 7.5 in	Bore diameter
D	241.3 mm 9.5 in	Outside diameter
B	25.4 mm 1 in	Width
Cr	47000 N	Basic dynamic load rating, radial
C0r	63000 N	Basic static load rating, radial
n_G	2480 1/min	Limiting speed
m	≈ 2.81 kg	Weight
Dimensions
r_min	2 mm	Minimum chamfer dimension
d₁	209.4 mm	Shoulder diameter inner ring
D₁	222.5 mm	Shoulder diameter on outer ring wide side face
D₂	228.3 mm	Shoulder diameter on outer ring small side face
α	30°	Shoulder diameter outer ring

INA CSEG075-HLE, Angular contact ball bearing, Thin section bearing CSEG, brass sheet metal cage. INA CSEG075-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.

INA CSEG075-HLE angular contact ball bearings (type E) can be filled with an increasednumber of balls and have a nominal contact angle of α = 30°. They cansupport considerably higher radial loads than deep groove ball bearings orfour point contact bearings and can support axial loads in one direction.

Comments