SKF 7322 BEM bearings
7322 BEM Single row angular contact ball bearing
- Measurement system
- Metric
- Bore diameter
- 110.000 mm
- Outside diameter
- 240.000 mm
- Width
- 50.000 mm
- Cr
- 225000 N
- C0r
- 224000 N
- Limiting speed
- 4000 r/min
- Net weight
- 10.5 kg
- Number of rows
- 1
- Contact angle deg
- 40
- Sealing
- Without
- Cage
- Machined brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- Normal (PN)
- Lubricant in bearing
- None
- Relubrication feature
- Without
In stock
Technical specification for SKF 7322 BEM
| Part Number | 7322 BEM | |
|---|---|---|
| Description | Single row angular contact ball bearing M : Machined brass cage, rolling element centred | |
| Cage | Machined brass cage | |
| Contact angle | 40° | |
| Number of rows | 1 | |
| Dimensions | ||
| d | 110.0 mm | Bore diameter |
| D | 240.0 mm | Outside diameter |
| B | 50.0 mm | Width |
| d1 | ≈ 160.8 mm | Shoulder diameter of inner ring (large side face) |
| d2 | ≈ 134.98 mm | Shoulder diameter of inner ring (small side face) |
| D1 | ≈ 193.5 mm | Shoulder diameter of outer ring (large side face) |
| a | 99.0 mm | Distance side face to pressure point |
| r1,2 | min. 3.0 mm | Chamfer dimension |
| r3,4 | min. 1.1 mm | Chamfer dimension |
| Abutment Dimensions | ||
| da | min. 124.0 mm | Diameter of shaft abutment |
| Da | max. 226.0 mm | Abutment diameter housing |
| Db | max. 233.0 mm | Diameter of housing abutment |
| ra | max. 2.5 mm | Radius of fillet |
| rb | max. 1.0 mm | Radius of fillet |
| Calculation Data | ||
| C | 225.0 kN | Basic dynamic load rating |
| C0 | 224.0 kN | Basic static load rating |
| Pu | 7.2 kN | Fatigue load limit |
| 4000.0 r/min | Limiting speed | |
| 3600.0 r/min | Reference speed | |
7322 BEM, Single row angular contact ball bearing, Bore diameter: 110.0 mm; Outside diameter: 240.0 mm; Width: 50.0 mm; Contact angle: 40°; Normal;.
SKF 7322 BEM, These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.
- Log in to post comments