IKO CRY64VR bearings
CRY 64 VR, Non-separable Roller Followers, Inch Series, Full complement
- Measurement system
- Inch
- Bore diameter
- 31.750 mm
- Outside diameter
- 101.600 mm
- Width
- 58.738 mm
- Width, ourter ring
- 57.150 mm
- Cr
- 142000 N
- C0r
- 317000 N
- Net weight
- 3190 g
- Number of rows
- 1
- Sealing
- Shield on both sides
- Cage
- Without
- Bore type
- Cylindrical
- Outer diameter type
- Crowner outer ring
- Bearing material
- Steel
- Rolling material
- Steel
- Lubricant in bearing
- Grease
- Relubrication feature
- With
- Coating
- Black oxide surface treatment
In stock
Technical specification for IKO CRY64VR
| Part Number | CRY 64 VR | |
|---|---|---|
| Brand | IKO | |
| Type | Non-separable Roller Followers, Inch series | |
| Out ring profile | Crowner outer ring | |
| Cage | Full complement | |
| Seal | Shield type | |
| d | 31.75 mm | Boundary dimensions |
| D | 101.6 mm | |
| B | 58.738 mm | |
| C | 57.15 mm | |
| a | 71 mm | |
| R | 760 mm | |
| Push fit | Min. 31.727 mm | Shaft dia. |
| Max. 31.74 mm | ||
| Drive fit | Min. 31.747 mm | |
| Max. 31.76 mm | ||
| Press fit | Min. 31.758 mm | |
| Max. 31.77 mm | ||
| C | 142000 N | Basic dynamic load rating |
| C0 | 317000 N | Basic static load rating |
| Mass | 3190 g | |
IKO CRY 64 VR Non-separable Roller Followers, Inch Series, Full Complement Type, Crowner outer ring, Shield type, Bore diameter 31.75 mm; Outside diameter 101.6 mm; Total width 58.738 mm; Width outer ring 57.15 mm.
- Log in to post comments
Related products
IKO CRY64V bearings
Brand: IKO
Roller Followers
Dimensions: 31.750x 101.600x 58.738mm