INA CSCU060-2RS-HLE bearings
Deep groove ball bearing, Thin section bearing CSCU..-2RS, seals, brass sheet metal cage
- Measurement system
- Inch
- Bore diameter
- 152.400 mm
- Outside diameter
- 171.450 mm
- Width
- 12.700 mm
- Cr
- 9000 N
- C0r
- 12200 N
- Limiting speed
- 1700 r/min
- Net weight
- 370.0 g
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Contact seal on both sides
- Cage
- Brass sheet metal
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- PL1
- Lubricant in bearing
- Grease
In stock
Technical specification for INA CSCU060-2RS-HLE
| Part Number | CSCU060-2RS-HLE | |
|---|---|---|
| Logistical code | HLE | |
| Sealing | 2RS | Contact seal on both sides |
| Cage | YH | brass sheet metal |
| Tolerance class | PL1 | Class PL1, Normal |
| Lubricant | Lubricating grease | - |
| Main Dimensions & Performance Data | ||
| d | 152.4 mm 6 in | Bore diameter |
| D | 171.45 mm 6.75 in | Outside diameter |
| B | 12.7 mm 0.5 in | Width |
| Cr | 9000 N | Basic dynamic load rating, radial |
| C0r | 12200 N | Basic static load rating, radial |
| nG | 1700 1/min | Limiting speed |
| m | ≈ 370.0 g | Weight |
| Dimensions | ||
| rmin | 0.38 mm | Minimum chamfer dimension |
| d1 | 156.2 mm | Caliber diameter inner ring |
| D1 | 166.2 mm | Caliber diameter outer ring |
INA CSCU060-2RS-HLE, Deep groove ball bearing, Thin section bearing CSCU..-2RS, seals, brass sheet metal cage. The seals are made from synthetic rubber (NBR) and have a steel insert. Sealed bearings are greased. INA CSCU060-2RS-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.
INA CSCU060-2RS-HLE deep groove ball bearing can support axial loads in both directions as well as radial loads; under axial load, a contact angle (α > 0°)is adopted.
- Log in to post comments
Related products
KAYDON JU060XP0 bearings
Brand: KAYDON
Reali-Slim thin section four-point contact ball bearing with seals
Dimensions: 152.400x 171.450x 12.700mm
KAYDON JU060CP0 bearings
Brand: KAYDON
Reali-Slim thin section radial contact ball bearing with seals
Dimensions: 152.400x 171.450x 12.700mm
INA CSXU060-2RS-HLE bearings
Brand: INA
Four-point contact bearing
Dimensions: 152.400x 171.450x 12.700mm