KAYDON JU060XP0 bearings
JU060XP0 KAYDON, 6.0 in Bore, 6.75 in Outside Diameter, 0.5 in Width, Four-point contact ball bearing (type X)


Reali-Slim thin section four-point contact ball bearing with seals
Measurement system
Inch
Bore diameter
152.400 mm
Outside diameter
171.450 mm
Width
12.700 mm
Cr
7870 N
C0r
13700 N
Limiting speed
410 r/min
Net weight
0.367 kg
Number of rows
1
Contact angle deg
30
Sealing
Seal on both sides
Cage
Brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
ABEC 1F
Lubricant in bearing
Grease
Relubrication feature
Without

In stock


Technical specification for KAYDON JU060XP0

KAYDON JU060XP0
Part Number JU060XP0
Type Reali-Slim thin section four-point contact ball bearing with seals (type X)
Contact angle 30°
Cage Brass
Sealing Seal on both sides
Material Bearing steel
Dimensions
d 152.4 mm Bore diameter
D 171.45 mm Outside diameter
H 9.525 mm Radial cross section
B 12.7 mm Width
d2 ≈156.21 mm Recess diameter inner ring
D2 ≈166.192 mm Recess diameter outer ring
4.763 mm Ball diameter
0.381 mm Maximum radius of shaft or housing fillet
Calculation data
Ck 7.87 kN Dynamic load rating, Kaydon, radial direction
C0 13.7 kN Basic static load rating, radial direction
C0a 34.1 kN Basic static load rating, axial direction
CM 0.478 kN·m Basic dynamic load rating, moment
C0M 1.104 kN·m Basic static load rating, moment
0.689 N·m Starting torque max. no load
410.0 r/min Limiting speed
Reali-Slim thin section four-point contact ball bearing with seals

KAYDON JU060XP0, Reali-Slim thin section four-point contact ball bearing with seals (type X); 6.0" Bore, 6.75" Outside Diameter, 0.5" Width, 0.375" radial cross section. KAYDON JU060XP0 can accommodate radial, axial and moment loads simultaneously. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

  • J: AISI 52100 steel rings and balls, NBR seal on both sides
  • U: Radial cross section 0.375 inches, Width 0.5 inches
  • 060: Inner diameter 6.0 inches
  • X: Four-point contact ball bearing
  • P: One-piece, snap-type, stamped brass cage
  • 0: Tolerance to Kaydon class 1 (ABEC 1F)
Comments

Related products

KAYDON  JU060CP0  bearings
KAYDON JU060CP0 bearings

Brand: KAYDON
Reali-Slim thin section radial contact ball bearing with seals
Dimensions: 152.400x 171.450x 12.700mm

INA  CSXU060-2RS-HLE  bearings
INA CSXU060-2RS-HLE bearings

Brand: INA
Four-point contact bearing
Dimensions: 152.400x 171.450x 12.700mm

INA  CSCU060-2RS-HLE  bearings
INA CSCU060-2RS-HLE bearings

Brand: INA
Deep groove ball bearing
Dimensions: 152.400x 171.450x 12.700mm