INA CSEC050-HLE bearings

Angular contact ball bearing, Thin section bearing CSEC, brass sheet metal cage

Measurement system: Inch
Bore diameter: 127.000 mm
Outside diameter: 146.050 mm
Width: 9.525 mm
Cr: 8700 N
C0r: 12600 N
Limiting speed: 4200 r/min
Net weight: 240.0 g
Number of rows: 1
Contact angle deg: 30
Sealing: Without
Cage: Brass sheet metal
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: PL1
Lubricant in bearing: Without

In stock

Technical specification for INA CSEC050-HLE

INA CSEC050-HLE
Main Dimensions & Performance Data
Part Number	CSEC050-HLE
Logistical code	HLE
Sealing	Without	not sealed
Cage	YP	brass sheet metal
Tolerance class	PL1	Class PL1, Normal
Lubricant	Without	Bearing not greased
d	127 mm 5 in	Bore diameter
D	146.05 mm 5.75 in	Outside diameter
B	9.525 mm 0.375 in	Width
Cr	8700 N	Basic dynamic load rating, radial
C0r	12600 N	Basic static load rating, radial
n_G	4200 1/min	Limiting speed
m	≈ 240.0 g	Weight
Dimensions
r_min	1 mm	Minimum chamfer dimension
d₁	134 mm	Shoulder diameter inner ring
D₁	139 mm	Shoulder diameter on outer ring wide side face
D₂	141 mm	Shoulder diameter on outer ring small side face
α	30°	Shoulder diameter outer ring

INA CSEC050-HLE, Angular contact ball bearing, Thin section bearing CSEC, brass sheet metal cage. INA CSEC050-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.

INA CSEC050-HLE angular contact ball bearings (type E) can be filled with an increasednumber of balls and have a nominal contact angle of α = 30°. They cansupport considerably higher radial loads than deep groove ball bearings orfour point contact bearings and can support axial loads in one direction.

Comments