INA CSXC050-HLE bearings

Four point contact bearing, Thin section bearing CSXC, brass sheet metal cage

Measurement system: Inch
Bore diameter: 127.000 mm
Outside diameter: 146.050 mm
Width: 9.525 mm
Cr: 11200 N
C0r: 17800 N
Limiting speed: 2450 r/min
Net weight: 260.0 g
Number of rows: 1
Contact angle deg: 30
Sealing: Without
Cage: Brass sheet metal
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: PL1
Lubricant in bearing: Without

In stock

Technical specification for INA CSXC050-HLE

INA CSXC050-HLE
Main Dimensions & Performance Data
Part Number	CSXC050-HLE
Logistical code	HLE
Sealing	Without	not sealed
Cage	YH	brass sheet metal
Tolerance class	PL1	Class PL1, Normal
Lubricant	Without	Bearing not greased
d	127 mm 5 in	Bore diameter
D	146.05 mm 5.75 in	Outside diameter
B	9.525 mm 0.375 in	Width
Cr	11200 N	Basic dynamic load rating, radial
C0r	17800 N	Basic static load rating, radial
n_G	2450 1/min	Limiting speed
m	≈ 260.0 g	Weight
Dimensions
r_min	1 mm	Minimum chamfer dimension
d₁	134 mm	Shoulder diameter inner ring
D₁	139 mm	Shoulder diameter outer ring
α	30°	Shoulder diameter outer ring

INA CSXC050-HLE, Four point contact bearing, Thin section bearing CSXC, brass sheet metal cage. INA CSXC050-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.

INA CSXC050-HLE four point contact bearings (type X) can support axial loads in both directionsas well as radial loads. As a result, they act in the same way asdouble row angular contact ball bearings.

Comments