INA CSED055-HLE bearings

Angular contact ball bearing, Thin section bearing CSED, brass sheet metal cage

Measurement system: Inch
Bore diameter: 139.700 mm
Outside diameter: 165.100 mm
Width: 12.700 mm
Cr: 13700 N
C0r: 18800 N
Limiting speed: 3700 r/min
Net weight: 480.0 g
Number of rows: 1
Contact angle deg: 30
Sealing: Without
Cage: Brass sheet metal
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: PL1
Lubricant in bearing: Without

In stock

Technical specification for INA CSED055-HLE

INA CSED055-HLE
Main Dimensions & Performance Data
Part Number	CSED055-HLE
Logistical code	HLE
Sealing	Without	not sealed
Cage	YP	brass sheet metal
Tolerance class	PL1	Class PL1, Normal
Lubricant	Without	Bearing not greased
d	139.7 mm 5.5 in	Bore diameter
D	165.1 mm 6.5 in	Outside diameter
B	12.7 mm 0.5 in	Width
Cr	13700 N	Basic dynamic load rating, radial
C0r	18800 N	Basic static load rating, radial
n_G	3700 1/min	Limiting speed
m	≈ 480.0 g	Weight
Dimensions
r_min	1.5 mm	Minimum chamfer dimension
d₁	149.1 mm	Shoulder diameter inner ring
D₁	155.7 mm	Shoulder diameter on outer ring wide side face
D₂	158.4 mm	Shoulder diameter on outer ring small side face
α	30°	Shoulder diameter outer ring

INA CSED055-HLE, Angular contact ball bearing, Thin section bearing CSED, brass sheet metal cage. INA CSED055-HLE have very small cross-sections relative to their diameters. This allows designs with smaller design envelope and lower mass, while achieving high rigidity and running accuracy.

INA CSED055-HLE angular contact ball bearings (type E) can be filled with an increasednumber of balls and have a nominal contact angle of α = 30°. They cansupport considerably higher radial loads than deep groove ball bearings orfour point contact bearings and can support axial loads in one direction.

Comments