KAYDON KD055AR0 bearings

KD055AR0 Reali-Slim thin section angular contact ball bearing

Measurement system: Inch
Bore diameter: 139.700 mm
Outside diameter: 165.100 mm
Width: 12.700 mm
Cr: 9540 N
C0r: 21100 N
Net weight: 0.48 kg
Number of rows: 1
Contact angle deg: 30
Sealing: Without
Cage: Brass
Bore type: Cylindrical
Outer diameter type: Cylindrical
Bearing material: Steel
Rolling material: Steel
Tolerance class: ABEC 1F

In stock

Technical specification for KAYDON KD055AR0

KAYDON KD055AR0
Dimensions
Part Number	KD055AR0
Type	Reali-Slim thin section angular contact ball bearing (type A)
Cage	Brass
Material	Bearing steel
Net weight	0.48 kg
d	139.7 mm	Bore diameter
D	165.1 mm	Outside diameter
H	12.7 mm	Radial cross section
B	12.7 mm	Width
d₁	≈149.098 mm	Shoulder diameter inner ring
D₁	≈155.702 mm	Shoulder diameter outer ring
D₄	≈158.445 mm	Shoulder diameter outer ring
	6.35 mm	Ball diameter
	1.524 mm	Maximum radius of shaft or housing fillet
Calculation data
C_k	9.54 kN	Dynamic load rating, Kaydon, radial direction
C₀	21.1 kN	Basic static load rating, radial direction
C_0a	60.9 kN	Basic static load rating, axial direction

Kaydon KD055AR0, Reali-Slim thin section angular contact ball bearing (type A), KD series, Radial cross section 12.7 mm, 30° contact angle. KAYDON KD055AR0 can accommodate radial and axial loads acting simultaneously, where the axial load acts in only one direction.

K: AISI 52100 Steel, No seals or shields
D: Radial thickness 0.5 inches, Width 0.5 inches
055: Inner diameter 5.5 inches
A: Angular contact ball bearing
R: One-piece, circular pocket, stamped brass cage
0: Tolerance to Kaydon class 1 (ABEC 1F)

Comments