KAYDON JA025XP0 bearings
JA025XP0 KAYDON, 2.5 in Bore, 3.0 in Outside Diameter, 0.25 in Width, Thin section four-point contact ball bearing


Reali-Slim thin section four-point contact ball bearing with seals
Measurement system
Inch
Bore diameter
63.500 mm
Outside diameter
76.200 mm
Width
6.350 mm
Cr
2590 N
C0r
3690 N
Limiting speed
1200 r/min
Net weight
0.0544 kg
Number of rows
1
Contact angle deg
30
Sealing
Seal on both sides
Cage
Brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
ABEC 1F
Lubricant in bearing
Grease
Relubrication feature
Without

In stock


Technical specification for KAYDON JA025XP0

KAYDON JA025XP0
Part Number JA025XP0
Type Reali-Slim thin section four-point contact ball bearing with seals (type X)
Contact angle 30°
Cage Brass
Sealing Seal on both sides
Material Bearing steel
Dimensions
d 63.5 mm Bore diameter
D 76.2 mm Outside diameter
H 6.35 mm Radial cross section
B 6.35 mm Width
d2 ≈67.259 mm Recess diameter inner ring
D2 ≈72.542 mm Recess diameter outer ring
3.175 mm Ball diameter
0.635 mm Maximum radius of shaft or housing fillet
Calculation data
Ck 2.59 kN Dynamic load rating, Kaydon, radial direction
C0 3.69 kN Basic static load rating, radial direction
C0a 9.3 kN Basic static load rating, axial direction
CM 0.0679 kN·m Basic dynamic load rating, moment
C0M 0.13 kN·m Basic static load rating, moment
0.0564 N·m Starting torque max. no load
1200.0 r/min Limiting speed
Reali-Slim thin section four-point contact ball bearing with seals

KAYDON JA025XP0, Reali-Slim thin section four-point contact ball bearing with seals (type X), JA series; 2.5" Bore, 3.0" Outside Diameter, 0.25" Width, 0.25" radial cross section. KAYDON JA025XP0 can accommodate radial, axial and moment loads simultaneously. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

  • J: AISI 52100 steel rings and balls, NBR seal on both sides
  • A: Radial cross section 0.25 inches, Width 0.25 inches
  • 025: Inner diameter 2.5 inches
  • X: Four-point contact ball bearing
  • P: One-piece, snap-type, stamped brass cage
  • 0: Tolerance to Kaydon class 1 (ABEC 1F)
Comments

Related products

KAYDON  JA025CP0  bearings
KAYDON JA025CP0 bearings

Brand: KAYDON
Reali-Slim thin section radial contact ball bearing with seals
Dimensions: 63.500x 76.200x 6.350mm