KAYDON JA030XP0 bearings
JA030XP0 KAYDON, 3.0 in Bore, 3.5 in Outside Diameter, 0.25 in Width, Thin section four-point contact ball bearing
- Measurement system
- Inch
- Bore diameter
- 76.200 mm
- Outside diameter
- 88.900 mm
- Width
- 6.350 mm
- Cr
- 2860 N
- C0r
- 4400 N
- Limiting speed
- 830 r/min
- Net weight
- 0.0635 kg
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Seal on both sides
- Cage
- Brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- ABEC 1F
- Lubricant in bearing
- Grease
- Relubrication feature
- Without
In stock
Technical specification for KAYDON JA030XP0
| Part Number | JA030XP0 | |
|---|---|---|
| Type | Reali-Slim thin section four-point contact ball bearing with seals (type X) | |
| Contact angle | 30° | |
| Cage | Brass | |
| Sealing | Seal on both sides | |
| Material | Bearing steel | |
| Dimensions | ||
| d | 76.2 mm | Bore diameter |
| D | 88.9 mm | Outside diameter |
| H | 6.35 mm | Radial cross section |
| B | 6.35 mm | Width |
| d2 | ≈79.959 mm | Recess diameter inner ring |
| D2 | ≈85.242 mm | Recess diameter outer ring |
| 3.175 mm | Ball diameter | |
| 0.635 mm | Maximum radius of shaft or housing fillet | |
| Calculation data | ||
| Ck | 2.86 kN | Dynamic load rating, Kaydon, radial direction |
| C0 | 4.4 kN | Basic static load rating, radial direction |
| C0a | 11.0 kN | Basic static load rating, axial direction |
| CM | 0.0887 kN·m | Basic dynamic load rating, moment |
| C0M | 0.181 kN·m | Basic static load rating, moment |
| 0.0846 N·m | Starting torque max. no load | |
| 830.0 r/min | Limiting speed | |
KAYDON JA030XP0, Reali-Slim thin section four-point contact ball bearing with seals (type X), JA series; 3.0" Bore, 3.5" Outside Diameter, 0.25" Width, 0.25" radial cross section. KAYDON JA030XP0 can accommodate radial, axial and moment loads simultaneously. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
- J: AISI 52100 steel rings and balls, NBR seal on both sides
- A: Radial cross section 0.25 inches, Width 0.25 inches
- 030: Inner diameter 3.0 inches
- X: Four-point contact ball bearing
- P: One-piece, snap-type, stamped brass cage
- 0: Tolerance to Kaydon class 1 (ABEC 1F)
- Log in to post comments
Related products
KAYDON JA030CP0 bearings
Brand: KAYDON
Reali-Slim thin section radial contact ball bearing with seals
Dimensions: 76.200x 88.900x 6.350mm