KAYDON JB040XP0 bearings
JB040XP0 KAYDON, 4.0 in Bore, 4.625 in Outside Diameter, 0.313 in Width, Four-point contact ball bearing (type X)

Inquiry for price
Reali-Slim thin section four-point contact ball bearing with seals
Measurement system
Inch
Bore diameter
101.600 mm
Outside diameter
117.475 mm
Width
7.938 mm
Cr
4850 N
C0r
7780 N
Limiting speed
620 r/min
Net weight
0.136 kg
Number of rows
1
Contact angle deg
30
Sealing
Seal on both sides
Cage
Brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
ABEC 1F
Lubricant in bearing
Grease
Relubrication feature
Without

In stock

Technical specification for KAYDON JB040XP0

KAYDON JB040XP0
Part Number JB040XP0
Type Reali-Slim thin section four-point contact ball bearing with seals (type X)
Contact angle 30°
Cage Brass
Sealing Seal on both sides
Material Bearing steel
Dimensions
d 101.6 mm Bore diameter
D 117.475 mm Outside diameter
H 7.938 mm Radial cross section
B 7.938 mm Width
d2 ≈106.655 mm Recess diameter inner ring
D2 ≈112.395 mm Recess diameter outer ring
3.969 mm Ball diameter
1.016 mm Maximum radius of shaft or housing fillet
Calculation data
Ck 4.85 kN Dynamic load rating, Kaydon, radial direction
C0 7.78 kN Basic static load rating, radial direction
C0a 19.4 kN Basic static load rating, axial direction
CM 0.199 kN·m Basic dynamic load rating, moment
C0M 0.426 kN·m Basic static load rating, moment
0.141 N·m Starting torque max. no load
620.0 r/min Limiting speed
Reali-Slim thin section four-point contact ball bearing with seals

KAYDON JB040XP0, Reali-Slim thin section four-point contact ball bearing with seals (type X); 4.0" Bore, 4.625" Outside Diameter, 0.313" Width, 0.313" radial cross section. KAYDON JB040XP0 can accommodate radial, axial and moment loads simultaneously. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

  • J: AISI 52100 steel rings and balls, NBR seal on both sides
  • B: Radial cross section 0.313 inches, Width 0.313 inches
  • 040: Inner diameter 4.0 inches
  • X: Four-point contact ball bearing
  • P: One-piece, snap-type, stamped brass cage
  • 0: Tolerance to Kaydon class 1 (ABEC 1F)
Comments

Related products

KAYDON JB040CP0 bearings
KAYDON JB040CP0 bearings

Brand: KAYDON
Reali-Slim thin section radial contact ball bearing with seals
Dimensions: 101.600x 117.475x 7.938mm