KAYDON JG090XP0 bearings
JG090XP0 KAYDON, 9.0 in Bore, 11.0 in Outside Diameter, 1.0 in Width, Four-point contact ball bearing (type X)

Inquiry for price
Reali-Slim thin section four-point contact ball bearing with seals
Measurement system
Inch
Bore diameter
228.600 mm
Outside diameter
279.400 mm
Width
25.400 mm
Cr
51300 N
C0r
73000 N
Limiting speed
190 r/min
Net weight
3.27 kg
Number of rows
1
Contact angle deg
30
Sealing
Seal on both sides
Cage
Brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
ABEC 1F
Lubricant in bearing
Grease
Relubrication feature
Without

In stock

Technical specification for KAYDON JG090XP0

KAYDON JG090XP0
Part Number JG090XP0
Type Reali-Slim thin section four-point contact ball bearing with seals (type X)
Contact angle 30°
Cage Brass
Sealing Seal on both sides
Material Bearing steel
Dimensions
d 228.6 mm Bore diameter
D 279.4 mm Outside diameter
H 25.4 mm Radial cross section
B 25.4 mm Width
d2 ≈242.672 mm Recess diameter inner ring
D2 ≈269.291 mm Recess diameter outer ring
12.7 mm Ball diameter
2.032 mm Maximum radius of shaft or housing fillet
Calculation data
Ck 51.3 kN Dynamic load rating, Kaydon, radial direction
C0 73.0 kN Basic static load rating, radial direction
C0a 183.0 kN Basic static load rating, axial direction
CM 4.885 kN·m Basic dynamic load rating, moment
C0M 9.274 kN·m Basic static load rating, moment
2.938 N·m Starting torque max. no load
190.0 r/min Limiting speed
Reali-Slim thin section four-point contact ball bearing with seals

KAYDON JG090XP0, Reali-Slim thin section four-point contact ball bearing with seals (type X); 9.0" Bore, 11.0" Outside Diameter, 1.0" Width, 1.0" radial cross section. KAYDON JG090XP0 can accommodate radial, axial and moment loads simultaneously. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

  • J: AISI 52100 steel rings and balls, NBR seal on both sides
  • G: Radial cross section 1.0 inches, Width 1.0 inches
  • 090: Inner diameter 9.0 inches
  • X: Four-point contact ball bearing
  • P: One-piece, snap-type, stamped brass cage
  • 0: Tolerance to Kaydon class 1 (ABEC 1F)
Comments

Related products

KAYDON JG090CP0 bearings
KAYDON JG090CP0 bearings

Brand: KAYDON
Reali-Slim thin section radial contact ball bearing with seals
Dimensions: 228.600x 279.400x 25.400mm