KAYDON JG160XP0 bearings
JG160XP0 KAYDON, 16.0 in Bore, 18.0 in Outside Diameter, 1.0 in Width, Four-point contact ball bearing (type X)


Reali-Slim thin section four-point contact ball bearing with seals
Measurement system
Inch
Bore diameter
406.400 mm
Outside diameter
457.200 mm
Width
25.400 mm
Cr
68600 N
C0r
124000 N
Limiting speed
110 r/min
Net weight
5.58 kg
Number of rows
1
Contact angle deg
30
Sealing
Seal on both sides
Cage
Brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
ABEC 1F
Lubricant in bearing
Grease
Relubrication feature
Without

In stock


Technical specification for KAYDON JG160XP0

KAYDON JG160XP0
Part Number JG160XP0
Type Reali-Slim thin section four-point contact ball bearing with seals (type X)
Contact angle 30°
Cage Brass
Sealing Seal on both sides
Material Bearing steel
Dimensions
d 406.4 mm Bore diameter
D 457.2 mm Outside diameter
H 25.4 mm Radial cross section
B 25.4 mm Width
d2 ≈420.472 mm Recess diameter inner ring
D2 ≈447.091 mm Recess diameter outer ring
12.7 mm Ball diameter
2.032 mm Maximum radius of shaft or housing fillet
Calculation data
Ck 68.6 kN Dynamic load rating, Kaydon, radial direction
C0 124.0 kN Basic static load rating, radial direction
C0a 310.0 kN Basic static load rating, axial direction
CM 11.115 kN·m Basic dynamic load rating, moment
C0M 26.8 kN·m Basic static load rating, moment
8.587 N·m Starting torque max. no load
110.0 r/min Limiting speed
Reali-Slim thin section four-point contact ball bearing with seals

KAYDON JG160XP0, Reali-Slim thin section four-point contact ball bearing with seals (type X); 16.0" Bore, 18.0" Outside Diameter, 1.0" Width, 1.0" radial cross section. KAYDON JG160XP0 can accommodate radial, axial and moment loads simultaneously. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

  • J: AISI 52100 steel rings and balls, NBR seal on both sides
  • G: Radial cross section 1.0 inches, Width 1.0 inches
  • 160: Inner diameter 16.0 inches
  • X: Four-point contact ball bearing
  • P: One-piece, snap-type, stamped brass cage
  • 0: Tolerance to Kaydon class 1 (ABEC 1F)
Comments

Related products

KAYDON  JG160CP0  bearings
KAYDON JG160CP0 bearings

Brand: KAYDON
Reali-Slim thin section radial contact ball bearing with seals
Dimensions: 406.400x 457.200x 25.400mm