KAYDON JG180XP0 bearings
JG180XP0 KAYDON, 18.0 in Bore, 20.0 in Outside Diameter, 1.0 in Width, Four-point contact ball bearing (type X)

Inquiry for price
Reali-Slim thin section four-point contact ball bearing with seals
Measurement system
Inch
Bore diameter
457.200 mm
Outside diameter
508.000 mm
Width
25.400 mm
Cr
72900 N
C0r
139000 N
Limiting speed
100 r/min
Net weight
6.21 kg
Number of rows
1
Contact angle deg
30
Sealing
Seal on both sides
Cage
Brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
ABEC 1F
Lubricant in bearing
Grease
Relubrication feature
Without

In stock

Technical specification for KAYDON JG180XP0

KAYDON JG180XP0
Part Number JG180XP0
Type Reali-Slim thin section four-point contact ball bearing with seals (type X)
Contact angle 30°
Cage Brass
Sealing Seal on both sides
Material Bearing steel
Dimensions
d 457.2 mm Bore diameter
D 508.0 mm Outside diameter
H 25.4 mm Radial cross section
B 25.4 mm Width
d2 ≈471.272 mm Recess diameter inner ring
D2 ≈497.891 mm Recess diameter outer ring
12.7 mm Ball diameter
2.032 mm Maximum radius of shaft or housing fillet
Calculation data
Ck 72.9 kN Dynamic load rating, Kaydon, radial direction
C0 139.0 kN Basic static load rating, radial direction
C0a 347.0 kN Basic static load rating, axial direction
CM 13.196 kN·m Basic dynamic load rating, moment
C0M 33.477 kN·m Basic static load rating, moment
10.734 N·m Starting torque max. no load
100.0 r/min Limiting speed
Reali-Slim thin section four-point contact ball bearing with seals

KAYDON JG180XP0, Reali-Slim thin section four-point contact ball bearing with seals (type X); 18.0" Bore, 20.0" Outside Diameter, 1.0" Width, 1.0" radial cross section. KAYDON JG180XP0 can accommodate radial, axial and moment loads simultaneously. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

  • J: AISI 52100 steel rings and balls, NBR seal on both sides
  • G: Radial cross section 1.0 inches, Width 1.0 inches
  • 180: Inner diameter 18.0 inches
  • X: Four-point contact ball bearing
  • P: One-piece, snap-type, stamped brass cage
  • 0: Tolerance to Kaydon class 1 (ABEC 1F)
Comments

Related products

KAYDON JG180CP0 bearings
KAYDON JG180CP0 bearings

Brand: KAYDON
Reali-Slim thin section radial contact ball bearing with seals
Dimensions: 457.200x 508x 25.400mm