KAYDON JHA15XL0 bearings
JHA15XL0 KAYDON, 1.5 in Bore, 1.875 in Outside Diameter, 0.25 in Width, Four-point contact ball bearing (type X)

Inquiry for price
Reali-Slim thin section four-point contact ball bearing with seals
Measurement system
Inch
Bore diameter
38.100 mm
Outside diameter
47.625 mm
Width
6.350 mm
Cr
1320 N
C0r
1780 N
Limiting speed
2000 r/min
Net weight
0.0227 kg
Number of rows
1
Contact angle deg
30
Sealing
Seal on both sides
Cage
Non-metallic
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
ABEC 1F
Lubricant in bearing
Grease
Relubrication feature
Without

In stock

Technical specification for KAYDON JHA15XL0

KAYDON JHA15XL0
Part Number JHA15XL0
Type Reali-Slim thin section four-point contact ball bearing with seals (type X)
Contact angle 30°
Cage Brass
Sealing Seal on both sides
Material Bearing steel
Dimensions
d 38.1 mm Bore diameter
D 47.625 mm Outside diameter
H 4.763 mm Radial cross section
B 6.35 mm Width
d2 ≈40.843 mm Recess diameter inner ring
D2 ≈45.06 mm Recess diameter outer ring
2.381 mm Ball diameter
0.381 mm Maximum radius of shaft or housing fillet
Calculation data
Ck 1.32 kN Dynamic load rating, Kaydon, radial direction
C0 1.78 kN Basic static load rating, radial direction
C0a 4.45 kN Basic static load rating, axial direction
CM 0.0211 kN·m Basic dynamic load rating, moment
C0M 0.0384 kN·m Basic static load rating, moment
0.0353 N·m Starting torque max. no load
2000.0 r/min Limiting speed
Reali-Slim thin section four-point contact ball bearing with seals

KAYDON JHA15XL0, Reali-Slim thin section four-point contact ball bearing with seals (type X); 1.5" Bore, 1.875" Outside Diameter, 0.25" Width, 0.188" radial cross section. KAYDON JHA15XL0 can accommodate radial, axial and moment loads simultaneously. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

  • J: AISI 52100 steel rings and balls, NBR seal on both sides
  • HA: Radial cross section 0.188 inches, Width 0.25 inches
  • 15: Inner diameter 1.5 inches
  • X: Four-point contact ball bearing
  • L: One-piece, snap-type, PA12 cage
  • 0: Tolerance to Kaydon class 1 (ABEC 1F)
Comments

Related products

KAYDON JHA15CL0 bearings
KAYDON JHA15CL0 bearings

Brand: KAYDON
Reali-Slim thin section radial contact ball bearing with seals
Dimensions: 38.100x 47.625x 6.350mm