KAYDON JU050XP0 bearings
JU050XP0 KAYDON, 5.0 in Bore, 5.75 in Outside Diameter, 0.5 in Width, Four-point contact ball bearing (type X)

Inquiry for price
Reali-Slim thin section four-point contact ball bearing with seals
Measurement system
Inch
Bore diameter
127.000 mm
Outside diameter
146.050 mm
Width
12.700 mm
Cr
7120 N
C0r
11500 N
Limiting speed
500 r/min
Net weight
0.308 kg
Number of rows
1
Contact angle deg
30
Sealing
Seal on both sides
Cage
Brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
ABEC 1F
Lubricant in bearing
Grease
Relubrication feature
Without

In stock

Technical specification for KAYDON JU050XP0

KAYDON JU050XP0
Part Number JU050XP0
Type Reali-Slim thin section four-point contact ball bearing with seals (type X)
Contact angle 30°
Cage Brass
Sealing Seal on both sides
Material Bearing steel
Dimensions
d 127.0 mm Bore diameter
D 146.05 mm Outside diameter
H 9.525 mm Radial cross section
B 12.7 mm Width
d2 ≈130.81 mm Recess diameter inner ring
D2 ≈140.792 mm Recess diameter outer ring
4.763 mm Ball diameter
0.381 mm Maximum radius of shaft or housing fillet
Calculation data
Ck 7.12 kN Dynamic load rating, Kaydon, radial direction
C0 11.5 kN Basic static load rating, radial direction
C0a 28.7 kN Basic static load rating, axial direction
CM 0.364 kN·m Basic dynamic load rating, moment
C0M 0.785 kN·m Basic static load rating, moment
0.486 N·m Starting torque max. no load
500.0 r/min Limiting speed
Reali-Slim thin section four-point contact ball bearing with seals

KAYDON JU050XP0, Reali-Slim thin section four-point contact ball bearing with seals (type X); 5.0" Bore, 5.75" Outside Diameter, 0.5" Width, 0.375" radial cross section. KAYDON JU050XP0 can accommodate radial, axial and moment loads simultaneously. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

  • J: AISI 52100 steel rings and balls, NBR seal on both sides
  • U: Radial cross section 0.375 inches, Width 0.5 inches
  • 050: Inner diameter 5.0 inches
  • X: Four-point contact ball bearing
  • P: One-piece, snap-type, stamped brass cage
  • 0: Tolerance to Kaydon class 1 (ABEC 1F)
Comments

Related products

KAYDON JU050CP0 bearings
KAYDON JU050CP0 bearings

Brand: KAYDON
Reali-Slim thin section radial contact ball bearing with seals
Dimensions: 127x 146.050x 12.700mm

INA CSXU050-2RS-HLE bearings
INA CSXU050-2RS-HLE bearings

Brand: INA
Four-point contact bearing
Dimensions: 127x 146.050x 12.700mm

INA CSCU050-2RS-HLE bearings
INA CSCU050-2RS-HLE bearings

Brand: INA
Deep groove ball bearing
Dimensions: 127x 146.050x 12.700mm