KAYDON JU065XP0 bearings
JU065XP0 KAYDON, 6.5 in Bore, 7.25 in Outside Diameter, 0.5 in Width, Four-point contact ball bearing (type X)
- Measurement system
- Inch
- Bore diameter
- 165.100 mm
- Outside diameter
- 184.150 mm
- Width
- 12.700 mm
- Cr
- 8230 N
- C0r
- 14700 N
- Limiting speed
- 380 r/min
- Net weight
- 0.395 kg
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Seal on both sides
- Cage
- Brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- ABEC 1F
- Lubricant in bearing
- Grease
- Relubrication feature
- Without
In stock
Technical specification for KAYDON JU065XP0
| Dimensions | ||
|---|---|---|
| Calculation data | ||
| Part Number | JU065XP0 | |
| Type | Reali-Slim thin section four-point contact ball bearing with seals (type X) | |
| Contact angle | 30° | |
| Cage | Brass | |
| Sealing | Seal on both sides | |
| Material | Bearing steel | |
| d | 165.1 mm | Bore diameter |
| D | 184.15 mm | Outside diameter |
| H | 9.525 mm | Radial cross section |
| B | 12.7 mm | Width |
| d2 | ≈168.91 mm | Recess diameter inner ring |
| D2 | ≈178.892 mm | Recess diameter outer ring |
| 4.763 mm | Ball diameter | |
| 0.381 mm | Maximum radius of shaft or housing fillet | |
| Ck | 8.23 kN | Dynamic load rating, Kaydon, radial direction |
| C0 | 14.7 kN | Basic static load rating, radial direction |
| C0a | 36.8 kN | Basic static load rating, axial direction |
| CM | 0.54 kN·m | Basic dynamic load rating, moment |
| C0M | 1.285 kN·m | Basic static load rating, moment |
| 0.791 N·m | Starting torque max. no load | |
| 380.0 r/min | Limiting speed | |
KAYDON JU065XP0, Reali-Slim thin section four-point contact ball bearing with seals (type X); 6.5" Bore, 7.25" Outside Diameter, 0.375" Width, 0.375" radial cross section. KAYDON JU065XP0 can accommodate radial, axial and moment loads simultaneously. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
- J: AISI 52100 steel rings and balls, NBR seal on both sides
- U: Radial cross section 0.375 inches, Width 0.5 inches
- 065: Inner diameter 6.5 inches
- X: Four-point contact ball bearing
- P: One-piece, snap-type, stamped brass cage
- 0: Tolerance to Kaydon class 1 (ABEC 1F)
- Log in to post comments
Related products
KAYDON JU065CP0 bearings
Brand: KAYDON
Reali-Slim thin section radial contact ball bearing with seals
Dimensions: 165.100x 184.150x 12.700mm
INA CSXU065-2RS-HLE bearings
Brand: INA
Four-point contact bearing
Dimensions: 165.100x 184.150x 12.700mm
INA CSCU065-2RS-HLE bearings
Brand: INA
Deep groove ball bearing
Dimensions: 165.100x 184.150x 12.700mm