KAYDON JU070XP0 bearings
JU070XP0 KAYDON, 7.0 in Bore, 7.75 in Outside Diameter, 0.5 in Width, Four-point contact ball bearing (type X)
- Measurement system
- Inch
- Bore diameter
- 177.800 mm
- Outside diameter
- 196.850 mm
- Width
- 12.700 mm
- Cr
- 8590 N
- C0r
- 15800 N
- Limiting speed
- 350 r/min
- Net weight
- 0.422 kg
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Seal on both sides
- Cage
- Brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- ABEC 1F
- Lubricant in bearing
- Grease
- Relubrication feature
- Without
In stock
Technical specification for KAYDON JU070XP0
| Part Number | JU070XP0 | |
|---|---|---|
| Type | Reali-Slim thin section four-point contact ball bearing with seals (type X) | |
| Contact angle | 30° | |
| Cage | Brass | |
| Sealing | Seal on both sides | |
| Material | Bearing steel | |
| Dimensions | ||
| d | 177.8 mm | Bore diameter |
| D | 196.85 mm | Outside diameter |
| H | 9.525 mm | Radial cross section |
| B | 12.7 mm | Width |
| d2 | ≈181.61 mm | Recess diameter inner ring |
| D2 | ≈191.592 mm | Recess diameter outer ring |
| 4.763 mm | Ball diameter | |
| 0.381 mm | Maximum radius of shaft or housing fillet | |
| Calculation data | ||
| Ck | 8.59 kN | Dynamic load rating, Kaydon, radial direction |
| C0 | 15.8 kN | Basic static load rating, radial direction |
| C0a | 39.5 kN | Basic static load rating, axial direction |
| CM | 0.603 kN·m | Basic dynamic load rating, moment |
| C0M | 1.478 kN·m | Basic static load rating, moment |
| 0.915 N·m | Starting torque max. no load | |
| 350.0 r/min | Limiting speed | |
KAYDON JU070XP0, Reali-Slim thin section four-point contact ball bearing with seals (type X); 7.0" Bore, 7.75" Outside Diameter, 0.5" Width, 0.375" radial cross section. KAYDON JU070XP0 can accommodate radial, axial and moment loads simultaneously. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
- J: AISI 52100 steel rings and balls, NBR seal on both sides
- U: Radial cross section 0.375 inches, Width 0.5 inches
- 070: Inner diameter 7.0 inches
- X: Four-point contact ball bearing
- P: One-piece, snap-type, stamped brass cage
- 0: Tolerance to Kaydon class 1 (ABEC 1F)
- Log in to post comments
Related products
KAYDON JU070CP0 bearings
Brand: KAYDON
Reali-Slim thin section radial contact ball bearing with seals
Dimensions: 177.800x 196.850x 12.700mm
INA CSXU070-2RS-HLE bearings
Brand: INA
Four-point contact bearing
Dimensions: 177.800x 196.850x 12.700mm
INA CSCU070-2RS-HLE bearings
Brand: INA
Deep groove ball bearing
Dimensions: 177.800x 196.850x 12.700mm