KAYDON JU075XP0 bearings
JU075XP0 KAYDON, 7.5 in Bore, 8.25 in Outside Diameter, 0.5 in Width, Four-point contact ball bearing (type X)

Inquiry for price
Reali-Slim thin section four-point contact ball bearing with seals
Measurement system
Inch
Bore diameter
190.500 mm
Outside diameter
209.550 mm
Width
12.700 mm
Cr
8930 N
C0r
16900 N
Limiting speed
330 r/min
Net weight
0.449 kg
Number of rows
1
Contact angle deg
30
Sealing
Seal on both sides
Cage
Brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
ABEC 1F
Lubricant in bearing
Grease
Relubrication feature
Without

In stock

Technical specification for KAYDON JU075XP0

KAYDON JU075XP0
Part Number JU075XP0
Type Reali-Slim thin section four-point contact ball bearing with seals (type X)
Contact angle 30°
Cage Brass
Sealing Seal on both sides
Material Bearing steel
Dimensions
d 190.5 mm Bore diameter
D 209.55 mm Outside diameter
H 9.525 mm Radial cross section
B 12.7 mm Width
d2 ≈194.31 mm Recess diameter inner ring
D2 ≈204.292 mm Recess diameter outer ring
4.763 mm Ball diameter
0.381 mm Maximum radius of shaft or housing fillet
Calculation data
Ck 8.93 kN Dynamic load rating, Kaydon, radial direction
C0 16.9 kN Basic static load rating, radial direction
C0a 42.1 kN Basic static load rating, axial direction
CM 0.67 kN·m Basic dynamic load rating, moment
C0M 1.685 kN·m Basic static load rating, moment
1.039 N·m Starting torque max. no load
330.0 r/min Limiting speed
Reali-Slim thin section four-point contact ball bearing with seals

KAYDON JU075XP0, Reali-Slim thin section four-point contact ball bearing with seals (type X); 7.5" Bore, 8.25" Outside Diameter, 0.5" Width, 0.375" radial cross section. KAYDON JU075XP0 can accommodate radial, axial and moment loads simultaneously. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

  • J: AISI 52100 steel rings and balls, NBR seal on both sides
  • U: Radial cross section 0.375 inches, Width 0.5 inches
  • 075: Inner diameter 7.5 inches
  • X: Four-point contact ball bearing
  • P: One-piece, snap-type, stamped brass cage
  • 0: Tolerance to Kaydon class 1 (ABEC 1F)
Comments

Related products

KAYDON JU075CP0 bearings
KAYDON JU075CP0 bearings

Brand: KAYDON
Reali-Slim thin section radial contact ball bearing with seals
Dimensions: 190.500x 209.550x 12.700mm

INA CSXU075-2RS-HLE bearings
INA CSXU075-2RS-HLE bearings

Brand: INA
Four-point contact bearing
Dimensions: 190.500x 209.550x 12.700mm

INA CSCU075-2RS-HLE bearings
INA CSCU075-2RS-HLE bearings

Brand: INA
Deep groove ball bearing
Dimensions: 190.500x 209.550x 12.700mm