KAYDON JU120XP0 bearings
JU120XP0 KAYDON, 12.0 in Bore, 12.75 in Outside Diameter, 0.5 in Width, Four-point contact ball bearing (type X)

Inquiry for price
Reali-Slim thin section four-point contact ball bearing with seals
Measurement system
Inch
Bore diameter
304.800 mm
Outside diameter
323.850 mm
Width
12.700 mm
Cr
11700 N
C0r
26500 N
Limiting speed
160 r/min
Net weight
0.71 kg
Number of rows
1
Contact angle deg
30
Sealing
Seal on both sides
Cage
Brass
Bore type
Cylindrical
Outer diameter type
Cylindrical
Bearing material
Steel
Rolling material
Steel
Tolerance class
ABEC 1F
Lubricant in bearing
Grease
Relubrication feature
Without

In stock

Technical specification for KAYDON JU120XP0

KAYDON JU120XP0
Part Number JU120XP0
Type Reali-Slim thin section four-point contact ball bearing with seals (type X)
Contact angle 30°
Cage Brass
Sealing Seal on both sides
Material Bearing steel
Dimensions
d 304.8 mm Bore diameter
D 323.85 mm Outside diameter
H 9.525 mm Radial cross section
B 12.7 mm Width
d2 ≈308.61 mm Recess diameter inner ring
D2 ≈318.592 mm Recess diameter outer ring
4.763 mm Ball diameter
0.381 mm Maximum radius of shaft or housing fillet
Calculation data
Ck 11.7 kN Dynamic load rating, Kaydon, radial direction
C0 26.5 kN Basic static load rating, radial direction
C0a 66.2 kN Basic static load rating, axial direction
CM 1.375 kN·m Basic dynamic load rating, moment
C0M 4.161 kN·m Basic static load rating, moment
2.576 N·m Starting torque max. no load
160.0 r/min Limiting speed
Reali-Slim thin section four-point contact ball bearing with seals

KAYDON JU120XP0, Reali-Slim thin section four-point contact ball bearing with seals (type X); 12.0" Bore, 12.75" Outside Diameter, 0.5" Width, 0.375" radial cross section. KAYDON JU120XP0 can accommodate radial, axial and moment loads simultaneously. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

  • J: AISI 52100 steel rings and balls, NBR seal on both sides
  • U: Radial cross section 0.375 inches, Width 0.5 inches
  • 120: Inner diameter 12.0 inches
  • X: Four-point contact ball bearing
  • P: One-piece, snap-type, stamped brass cage
  • 0: Tolerance to Kaydon class 1 (ABEC 1F)
Comments

Related products

KAYDON JU120CP0 bearings
KAYDON JU120CP0 bearings

Brand: KAYDON
Reali-Slim thin section radial contact ball bearing with seals
Dimensions: 304.800x 323.850x 12.700mm