KAYDON KD180AR0 bearings
KD180AR0 Reali-Slim thin section angular contact ball bearing
- Measurement system
- Inch
- Bore diameter
- 457.200 mm
- Outside diameter
- 482.600 mm
- Width
- 12.700 mm
- Cr
- 18300 N
- C0r
- 65000 N
- Net weight
- 1.49 kg
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- ABEC 1F
In stock
Technical specification for KAYDON KD180AR0
| Part Number | KD180AR0 | |
|---|---|---|
| Type | Reali-Slim thin section angular contact ball bearing (type A) | |
| Cage | Brass | |
| Material | Bearing steel | |
| Net weight | 1.49 kg | |
| Dimensions | ||
| d | 457.2 mm | Bore diameter |
| D | 482.6 mm | Outside diameter |
| H | 12.7 mm | Radial cross section |
| B | 12.7 mm | Width |
| d1 | ≈466.598 mm | Shoulder diameter inner ring |
| D1 | ≈473.202 mm | Shoulder diameter outer ring |
| D4 | ≈475.285 mm | Shoulder diameter outer ring |
| 6.35 mm | Ball diameter | |
| 1.524 mm | Maximum radius of shaft or housing fillet | |
| Calculation data | ||
| Ck | 18.3 kN | Dynamic load rating, Kaydon, radial direction |
| C0 | 65.0 kN | Basic static load rating, radial direction |
| C0a | 188.0 kN | Basic static load rating, axial direction |
Kaydon KD180AR0, Reali-Slim thin section angular contact ball bearing (type A), KD series, Radial cross section 12.7 mm, 30° contact angle. KAYDON KD180AR0 can accommodate radial and axial loads acting simultaneously, where the axial load acts in only one direction.
- K: AISI 52100 Steel, No seals or shields
- D: Radial thickness 0.5 inches, Width 0.5 inches
- 180: Inner diameter 18 inches
- A: Angular contact ball bearing
- R: One-piece, circular pocket, stamped brass cage
- 0: Tolerance to Kaydon class 1 (ABEC 1F)
- Log in to post comments
Related products
INA CSED180-HLE bearings
Brand: INA
Angular contact ball bearing
Dimensions: 457.200x 482.600x 12.700mm
KAYDON KD180CP0 bearings
Brand: KAYDON
Reali-Slim thin section radial contact ball bearing
Dimensions: 457.200x 482.600x 12.700mm