KAYDON KF047XP0 bearings
Reali-Slim thin section four-point contact ball bearing, 4.75" ID, 6.25" OD, 0.75" Width
- Measurement system
- Inch
- Bore diameter
- 120.650 mm
- Outside diameter
- 158.750 mm
- Width
- 19.050 mm
- Cr
- 22500 N
- C0r
- 27600 N
- Net weight
- 1.0 kg
- Number of rows
- 1
- Contact angle deg
- 30
- Sealing
- Without
- Cage
- Brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- ABEC 1F
In stock
Technical specification for KAYDON KF047XP0
| Part Number | KF047XP0 | |
|---|---|---|
| Type | Reali-Slim thin section four-point contact ball bearing (type X) | |
| Contact angle | 30° | |
| Cage | Brass | |
| Material | Bearing steel | |
| Net weight | 1.0 kg | |
| Dimensions | ||
| d | 120.65 mm | Bore diameter |
| D | 158.75 mm | Outside diameter |
| H | 19.05 mm | Radial cross section |
| B | 19.05 mm | Width |
| d1 | ≈134.747 mm | Shoulder diameter inner ring |
| D1 | ≈144.653 mm | Shoulder diameter outer ring |
| 9.525 mm | Ball diameter | |
| 2.032 mm | Maximum radius of shaft or housing fillet | |
| Calculation data | ||
| Ck | 22.5 kN | Dynamic load rating, Kaydon, radial direction |
| C0 | 27.6 kN | Basic static load rating, radial direction |
| C0a | 69.0 kN | Basic static load rating, axial direction |
| CM | 1.177 kN•m | Basic dynamic load rating, moment |
| C0M | 69.0 kN•m | Basic static load rating, moment |
Kaydon KF047XP0, Reali-Slim thin section four-point contact ball bearing (type X), KF series, Radial cross section 19.05 mm, Brass cage. KAYDON KF047XP0 can accommodate radial and axial loads simultaneously, and require considerably less axial space than two angular contact ball bearings. KF047XP0 have thin cross section, light weight, low friction, high stiffness, and high running accuracy.
- K: AISI 52100 Steel, No seals or shields
- F: Radial cross section 0.75 inches, Width 0.75 inches
- 047: Inner diameter 4.75 inches
- X: Four-point contact ball bearing
- P: One-piece, snap-type, stamped brass cage
- 0: Tolerance to Kaydon class 1 (ABEC 1F)
- Log in to post comments
Related products
NSK NBX12019 bearings
Brand: NSK
N Series Inch Design Ball Bearings
Dimensions: 120.650x 158.750x 19.050mm
NSK NBA12019 bearings
Brand: NSK
N Series Inch Design Ball Bearings
Dimensions: 120.650x 158.750x 19.050mm
KAYDON KF047CP0 bearings
Brand: KAYDON
Reali-Slim thin section radial contact ball bearing
Dimensions: 120.650x 158.750x 19.050mm
KAYDON KF047AR0 bearings
Brand: KAYDON
Reali-Slim thin section angular contact ball bearing
Dimensions: 120.650x 158.750x 19.050mm