KAYDON KG065CP0 bearings
KG065CP0 KAYDON, 6.5" Bore, 8.5" Outside Diameter, 1.0" Width, Thin section radial contact ball bearing
- Measurement system
- Inch
- Bore diameter
- 165.100 mm
- Outside diameter
- 215.900 mm
- Width
- 25.400 mm
- Cr
- 32900 N
- C0r
- 53600 N
- Net weight
- 2.45 kg
- Number of rows
- 1
- Contact angle deg
- 0
- Sealing
- Without
- Cage
- Brass
- Bore type
- Cylindrical
- Outer diameter type
- Cylindrical
- Bearing material
- Steel
- Rolling material
- Steel
- Tolerance class
- ABEC 1F
In stock
Technical specification for KAYDON KG065CP0
| Part Number | KG065CP0 | |
|---|---|---|
| Type | Reali-Slim thin section radial contact ball bearing (type C) | |
| Contact angle | 0° | |
| Cage | Brass | |
| Material | Bearing steel | |
| Dimensions | ||
| d | 165.1 mm | Bore diameter |
| D | 215.9 mm | Outside diameter |
| H | 25.4 mm | Radial cross section |
| B | 25.4 mm | Width |
| d1 | ≈183.947 mm | Shoulder diameter inner ring |
| D1 | ≈197.053 mm | Shoulder diameter outer ring |
| 12.7 mm | Ball diameter | |
| 2.032 mm | Maximum radius of shaft or housing fillet | |
| Calculation data | ||
| Ck | 32.9 kN | Dynamic load rating, Kaydon, radial direction |
| C0 | 53.6 kN | Basic static load rating, radial direction |
KAYDON KG065CP0, Reali-Slim thin section radial contact ball bearing (type C), KG series; 6.5" Bore, 8.5" Outside Diameter, 1.0" Width, 1.0" radial cross section. KAYDON KG065CP0 are designed to accommodate radial loads and some axial loads in either direction.
- K: AISI 52100 Steel, No seals or shields
- G: Radial cross section 1.0 inches, Width 1.0 inches
- 065: Inner diameter 6.5 inches
- C: Radial contact ball bearing
- P: One-piece, snap-type, stamped brass cage
- 0: Tolerance to Kaydon class 1 (ABEC 1F)
- Log in to post comments
Related products
NSK NBA16525 bearings
Brand: NSK
N Series Inch Design Ball Bearings
Dimensions: 165.100x 215.900x 25.400mm
INA CSCG065-HLE bearings
Brand: INA
Deep groove ball bearing
Dimensions: 165.100x 215.900x 25.400mm
NSK NBC16525 bearings
Brand: NSK
Thin section bearings
Dimensions: 165.100x 215.900x 25.400mm